William had to update the rdmanifest file, so the checksum is no longer
matching.

If you re-run this command:

wget http://kforge.ros.org/rososx/homebrew/raw-file/tip/electric/rosdep.yaml
-O ~/.ros/rosdep.yaml


It should fix the checksum issue and install without a problem.

~mc

On Wed, Dec 21, 2011 at 11:28, Dorian Scholz <scholz@sim.tu-darmstadt.de>wrote:

>  Maybe you can run
>
> $ rosdep check rviz_qt
> and
> $ rosdep check rosgui_rviz
>
> to check where this error is coming from.
>
> I just filed a bug about a problem in the rviz_qt rosdep.yaml, but this
> should not affect you, if you are on OSX.
> https://code.ros.org/trac/ros-pkg/ticket/5312
> After I fixed that locally, I got not errors when running
> $ rosmake --rosdep-install rosgui_rviz
>
> Cheers,
> Dorian
>
>
> On 12/21/2011 04:31 PM, Ye Cheng wrote:
>
> I have one problem here. When I try to compile rosgui_rviz by
>
>> rosmake --rosdep-install rosgui_rviz
>>
>
> I always get:
>
>> rosdep install failed: Failed to load a rdmanifest from
>> https://kforge.ros.org/rosrelease/viewvc/sourcedeps/nvidia-cg/nvidia-cg-3.0_February2011.rdmanifest,
>> and no alternate URI given
>>
>
> I have rviz_qt installed before. But now if I try to install it again, I
> will get the same problem:
>
>> rosdep install failed: Failed to load a rdmanifest from
>> https://kforge.ros.org/rosrelease/viewvc/sourcedeps/nvidia-cg/nvidia-cg-3.0_February2011.rdmanifest,
>> and no alternate URI given
>>
>
> However we do have
> https://kforge.ros.org/rosrelease/viewvc/sourcedeps/nvidia-cg/nvidia-cg-3.0_February2011.rdmanifest.
>
>
> On Tue, Dec 20, 2011 at 7:03 PM, Dirk Thomas <mail@dirk-thomas.net> wrote:
>
>>  If I want to contribute a matplotlib plugin, shall I wait for your
>>> Python API? I have successfully installed rviz_qt on OS X 10.6, but not
>>> original rviz. Most of the errors are from wx, and I'm not
>>> going to waste my time on installing old wx GUI tools. However I really
>>> need rxplot at the moment.
>>>
>>
>>  If you want rxplot-like functionality without wxWidgets you might want
>> to try the newly developed ROS GUI.
>> I can't promise anything for OS X, but if there are problems I suspect
>> them to be fixed fast.
>>
>> For more information see:
>> - the SIG "ROS GUI": http://www.ros.org/wiki/fuerte/Planning/ROS%20GUI
>> - posts on the mailing list:
>> https://code.ros.org/lurker/message/20111022.152853.6ab39e40.en.html
>>
>> Dirk
>>
>> _______________________________________________
>> ros-users mailing list
>> ros-users@code.ros.org
>> https://code.ros.org/mailman/listinfo/ros-users
>>
>
>
>
> _______________________________________________
> ros-users mailing listros-users@code.ros.orghttps://code.ros.org/mailman/listinfo/ros-users
>
>
>
> --
> Dipl.-Inform. Dorian Scholz         E-Mail:scholz(at)sim.tu-darmstadt.de
> Simulation, Systems Optimization    Phone:  +49 (0) 6151 16-4811
> and Robotics Group                  Fax:    +49 (0) 6151 16-6648
> Technische Universität Darmstadt    http://www.sim.tu-darmstadt.de
> Hochschulstr. 10                    D-64289 Darmstadt, Germany
>
>
> _______________________________________________
> ros-users mailing list
> ros-users@code.ros.org
> https://code.ros.org/mailman/listinfo/ros-users
>
>