Ugo,
You can install any stack individually. The urdf parsing is in the robot_model stack and kdl is in the geometry stack.
Both are in the boxturtle base installation which doesn't pull anything pr2 specific. See http://www.ros.org/wiki/ROS/Installation/Ubuntu
If you want a truly minimal set you can pull only the stacks up to that level. To do that I recommend trimming the boxturtle base rosinstall file at http://ros.org/rosinstalls/boxturtle_base.rosinstall to only have the following stacks
{{{
$ rosstack depends robot_model
ros
common_msgs
common
geometry
}}}
However I would recommend just pulling the boxturtle base install http://www.ros.org/wiki/ROS/Installation/Ubuntu
And if you're on Ubuntu you could also use the debian based install and just install ros-boxturtle-robot-model package.
Tully
Hi all,
Is it possible to install urdf and kdl for ros, without having to
install the whole pr2 stuff? (if yes, how can I do that ?)
Cheers,
Ugo
--
Ugo Cupcic | Shadow Robot Company | ugo@shadowrobot.com
Software Engineer 251 Liverpool Road
need a Hand? London N1 1LX | +44 20 7700 2487
http://www.shadowrobot.com/hand/ @shadowrobot
_______________________________________________
ros-users mailing list
ros-users@code.ros.org
https://code.ros.org/mailman/listinfo/ros-users