Hi Rishi,
Hi,
I'm trying to use the sicktoolbox_wrapper stack with a SICK LMS200 laser rangefinder (connected over serial; port /dev/ttyS0). I set the permissions as described here (http://www.ros.org/wiki/sicktoolbox_wrapper/Tutorials/UsingTheSicklms) -- it shows: "crw-rw-rw- 1 root dialout 4, 64 2010-07-13 11:36 /dev/ttyS0". However, I get an error when I run the following:
rishi@rishi-portable:~$ rosrun sicktoolbox_wrapper sicklms _port:=/dev/ttyS0 _baud:=38400
The error:
*** Attempting to initialize the Sick LMS...
Attempting to open device @ /dev/ttyS0
Device opened!
Attempting to start buffer monitor...
Buffer monitor started!
Attempting to set requested baud rate...
A Timeout Occurred! 2 tries remaining
A Timeout Occurred! 1 tries remaining
A Timeout Occurred - SickLIDAR::_sendMessageAndGetReply: Attempted max number of tries w/o success!
Failed to set requested baud rate...
Attempting to detect LMS baud rate...
Checking 19200bps...
A Timeout Occurred! 2 tries remaining
A Timeout Occurred! 1 tries remaining
A Timeout Occurred - SickLIDAR::_sendMessageAndGetReply: Attempted max number of tries w/o success!
Checking 38400bps...
A Timeout Occurred! 2 tries remaining
A Timeout Occurred! 1 tries remaining
A Timeout Occurred - SickLIDAR::_sendMessageAndGetReply: Attempted max number of tries w/o success!
Checking 500Kbps...
A Timeout Occurred! 2 tries remaining
A Timeout Occurred! 1 tries remaining
A Timeout Occurred - SickLIDAR::_sendMessageAndGetReply: Attempted max number of tries w/o success!
ERROR: I/O exception - SickLMS::Initialize: failed to detect baud rate!
[ERROR] [1279035417.096500632]: Initialise failed! are you using the correct device path?
[ERROR] [1279035417.096682835]: woah! error!
It seems the issue is the baud rate, but I set it manually in my rosrun command -- any ideas?
Thanks!
Rishi
Rishi Bedi
rbedi100@gmail.com
_______________________________________________
ros-users mailing list
ros-users@code.ros.org
https://code.ros.org/mailman/listinfo/ros-users