Hi Soonhac,
I try to change the video format to: <param name="video_mode" value="format7_3" />,
but when i launch the file, i got this error.
libdc1394 error: Error: Failed to allocate iso bandwidth
libdc1394 error: Error: Failed to setup DMA capture
[FATAL] [1297391608.293522530]: [camera] exception opening device: [Camera1394::open]: Failed to open device!
Thanks,
XR Tay
Date: Thu, 10 Feb 2011 15:55:27 -0600
From: soonhac.hong@gmail.com
To: ros-users@code.ros.org
Subject: Re: [ros-users] Trying to get bumblebee2 to work
Message body
Hi,
If you're using BumbleBee2 v1.0, there might be two possibilities as
follows.
1. ROS version.
BumbleBee2 v1.0 has been developed on ROS Box Turtle. For CTurtle,
you may modify the code according to http://code.ros.org/lurker/message/20100806.145740.e4fef600.en.html.
2. Video Format.
I think you may try alternative video format following to http://code.ros.org/lurker/message/20100614.205148.03c02b5c.en.html
According to the recent similar issue, alternative video format
would solve your problem.
If there is any additional doubt, feel free to contact me.
Best,
Soonhac
On 2/10/2011 2:56 AM, xr tay wrote:
Thanks for the reply from everyone, I manage to run the bumblebee2
launch file and display the camera through RVIZ.
The output from the /bumblebee2/right/image_raw was alright but
the other output from the bumblebee2/left/image_raw
was not properly display. The output was full of black and white
dots on the image. When I cover one of the camera, I found
out that the output was being produced from the right cam instead
of the left cam.
Anyone knows where it went wrong? Is it got to do with my
bumblebee2 config?
Here is my config:
process[bumblebee2-1]: started with pid [6214]
[ INFO] [1297324473.544436145]: Reconfigure request: brightness
-1, encoding , exposure -1, gain -1, shutter -1, whitebalance auto
[ INFO] [1297324473.544534599]: reconfigure level = 4294967295
[ INFO] [1297324473.576890845]: [camera] video mode:
640x480_stereo_mono, frame ID: /camera
[ INFO] [1297324473.662994222]: Found camera with GUID
b09d010099a7f9
[ I NFO] [1297324473.663056380]: No guid specified, using first
camera found, GUID: b09d010099a7f9
[ INFO] [1297324473.668001519]: [camera] connected to device, ID:
00b09d010099a7f9
[ INFO] [1297324473.673143496]: [camera] Auto Brightness set
[ INFO] [1297324473.678125407]: [camera] Auto Exposure set
[ INFO] [1297324473.685352035]: [camera] Auto Gain set
[ INFO] [1297324473.690035210]: [camera] Auto Shutter set
[ INFO] [1297324473.694721852]: [camera] Auto Whitebalance set
[ INFO] [1297324473.699256800]: [camera] Encoding set to
> Date: Mon, 7 Feb 2011 11:07:14 -0600
> From: jack.oquin@gmail.com
> To: ros-users@code.ros.org
> Subject: Re: [ros-users] Trying to get bumblebee2 to work
>
> 2011/2/7 xr tay <wrathy1987@hotmail.com>:
>
> > but the error is still there, so i was hoping if anyone
have any idea on how
> > to solve this error.
>
> Here are some generic 1394 device au thorization suggestions:
>
>
http://www.ros.org/wiki/camera1394/Troubleshooting#No_Bus_Access_Permissions
>
> The whole thing is quite confusing. Some commands set
permissions for
> the running system. Others initialize permissions after a
boot.
> --
> joq
> _______________________________________________
> ros-users mailing list
> ros-users@code.ros.org
> https://code.ros.org/mailman/listinfo/ros-users
_______________________________________________
ros-users mailing list
ros-users@code.ros.org
https://code.ros.org/mailman/listinfo/ros-users
_______________________________________________
ros-users mailing list
ros-users@code.ros.org
https://code.ros.org/mailman/listinfo/ros-users