Dejan Pangercic wrote: > Hey Patrick, >> If it doesn't find your camera, then I'd suggest manually downloading >> the Beta libmesa .deb from the web and installing that instead of the >> .deb that gets manually installed by my program. Running >> libMesaSRTester successfully is a prerequisite to having my driver work, >> and will often flash the firmware to get the device in a state to talk >> to the new API. > This is how my testing ends (using your libmesa .deb): > " >>>>> >>>> CMesaDevice::Read:usb_bulk_read failed! Request:0xb0 RequestType:0x40 Requested Size: 64 Received Size(Result): -110 >>>>> >>>> CMesaDevice::Read: did not get requested bytes: 64<->0 >>>>> >>>> CMesaDevice::Read:usb_bulk_read failed! Request:0xb0 RequestType:0x40 Requested Size: 64 Received Size(Result): -110 >>>>> >>>> CMesaDevice::Read: did not get requested bytes: 64<->0 >>>>> >>>> CMesaDevice::Read:usb_bulk_read failed! Request:0xb0 RequestType:0x40 Requested Size: 64 Received Size(Result): -110 >>>>> >>>> CMesaDevice::Read: did not get requested bytes: 64<->0 >>>>> >>>> CM_CAM_SELECT->CP_CS_CLOSEDLG > ****002**** Testing SR_OpenDlg SUCCESS > ****003**** Testing SR_GetDeviceString >>>>> >>>> VendorID:0x0852, ProductID:0x0074, Manufacturer:'CSEM SA', Product:'3D-SR3000 ' > ****003**** Testing SR_GetDeviceString SUCCESS > ****004**** Testing SR_SetTimeout (BLIND) SUCCESS > ****005**** Testing Get Rows/Cols FAILED > ****006**** Testing Get Rows/Cols FAILED > ****007**** Testing GetImageList SUCCESS > ****008**** Testing GetImage SUCCESS > ****009**** Testing GetImage SUCCESS > ****010**** Testing GetImage SUCCESS > ****011**** Testing GetImage SUCCESS > Segmentation fault > " > Shall I be concerned about the seg. fault? > > You shouldn't see "FAILED" and definitely shouldn't get a segfault. Did it print out any messages about "Flashing firmware" (or similar)? I'm guessing that it isn't going to work until it upgrades the firmware, which happens onmy SR4k, whenever I get a new version of the library. You may have to contact Mesa about this, as this library is supposed to work for all their SR products. Sorry that it doesn't seem to be working for yours. You could try their Windows version of the libmesasr driver with their visualization software. Mayne this will get far enough along to flash the new firmware, which will allow it to work under Linux. Or maybe there is some manual process that isn't documented to get some sr3K devices working with the new libmesa libraries. Again sorry.