Hi Vinay,
I am also trying to setup pioneer 3dx base. I have boxturtle installed using
Ubuntu debs released on 18th June. 
It is connected to serial port. As a nettwork setting, I am configuring base
station and pioneer both on local host 

Following steps mentioned in tutorial
http://www.ros.org/wiki/p2os/Tutorials/Getting%20Started%20with%20p2os and
after successful compilation, following variables are set.

export ROS_MASTER_URI=http://localhost:11311
export ROS_MASTER_IP=127.0.0.1


I am getting following errors on pr2os_dashboard run: 

nitin@tangri:/opt/ros/boxturtle$ rosrun p2os_dashboard p2os_dashboard
Traceback (most recent call last):
  File
"/opt/ros/boxturtle/openCodes/usc-ros-pkg/p2os/p2os_dashboard/scripts/p2os_dashboard",
line 50, in <module>
    import p2os_dashboard
  File
"/opt/ros/boxturtle/openCodes/usc-ros-pkg/p2os/p2os_dashboard/src/p2os_dashboard/__init__.py",
line 1, in <module>
    from p2os_frame import *
  File
"/opt/ros/boxturtle/openCodes/usc-ros-pkg/p2os/p2os_dashboard/src/p2os_dashboard/p2os_frame.py",
line 58, in <module>
    import rxtools.cppwidgets as rxtools
  File "/opt/ros/boxturtle/ros/tools/rxtools/src/rxtools/cppwidgets.py",
line 34, in <module>
    from rxtoolscpp import *
  File "/opt/ros/boxturtle/ros/tools/rxtools/lib/rxtoolscpp.py", line 83, in
<module>
    _rxtoolscpp.RosoutFilter_swigregister(RosoutFilter)
SystemError: UnpackTuple() argument list is not a tuple

I am able to communicate with 3dx using pr2os_driver which gives following
output:
nitin@tangri:/opt/ros/boxturtle$ rosrun p2os_driver p2os
[ INFO] 1279520026.304227000: using serial port: [/dev/ttyS0]
[ INFO] 1279520026.329203000: P2OS connection opening serial port
/dev/ttyS0...
[ INFO] 1279520026.729487000: SYNC0
[ INFO] 1279520026.929602000: turning off NONBLOCK mode...
[ INFO] 1279520027.129719000: SYNC1
[ INFO] 1279520027.529957000: SYNC2
[ INFO] 1279520028.130194000: Done.
   Connected to robotics_3655, a Pioneer p3dx-sh
[ INFO] 1279520030.531586000: resetting raw positions
[ WARN] 1279520083.660301000: Turn rate demand threshholded!
[ WARN] 1279520083.960596000: Turn rate demand threshholded!
[ WARN] 1279520084.859870000: Turn rate demand threshholded!
[ WARN] 1279520085.459867000: Turn rate demand threshholded!
[ WARN] 1279520085.859866000: Turn rate demand threshholded!
[ WARN] 1279520086.159867000: Turn rate demand threshholded!
[ WARN] 1279520088.959880000: Turn rate demand threshholded!

I am not able to move pioneer using following command:
nitin@tangri:/opt/ros/boxturtle/openCodes/usc-ros-pkg/p2os$  rosrun
teleop_base teleop_base_keyboard base_controller/command:=cmd_vel

It asks for turn rate and speed demand thresholding. Is it normal?  Or it is
caused by absence of dashboarded process.

thanks & regards
nitin

-- 
View this message in context: http://ros-users.122217.n3.nabble.com/Re-Basic-navigation-for-pioneer-robot-using-p2os-tp971765p977779.html
Sent from the ROS-Users mailing list archive at Nabble.com.

------------------------------------------------------------------------------
This SF.net email is sponsored by Sprint
What will you do first with EVO, the first 4G phone?
Visit sprint.com/first -- http://p.sf.net/sfu/sprint-com-first
_______________________________________________
ros-users mailing list
ros-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ros-users