There seems to be a arduino tcp stack. It is on the roswiki when you search for arduino. Allthough i also could not yet figure out how to use it... Verstuurd vanaf mijn iPhone Op 21 sep. 2011 om 23:19 heeft Mike Purvis het volgende geschreven: > Hey all, > > Has anyone had any luck deploying TCPROS on microcontrollers which have ethernet interfaces? > > I'm using a Cortex M3, and I'd like to be able to do realtime stuff, so I would prefer to stay close to the metal, rather than running on top of a linux kernel. What I'm envisioning is this device participating on a wired network with a PC which provides roscore. The M3 would come up and have an IP configured where it looks for core (or it could just arp on its subnet and try them all). > > On a high level, what's the feasibility of this? How possible will it be to run the comms portion of roscpp without depending on OS-provided process management, signalling, sockets, etc? > > I've been having trouble using eros with the vendor-provided toolchain, so I've also been experimenting with just manually compiling portions of libros--- how realistic is that as an alternative approach? > > As a third possibility, would it make sense to try to build this up from rosserial, rather than by peeling away layers of roscpp? > > Thanks for any feedback or suggestions, > > Mike > _______________________________________________ > ros-users mailing list > ros-users@code.ros.org > https://code.ros.org/mailman/listinfo/ros-users