Make sense, thanks for the explanation and advice! brian. On Thu, Dec 20, 2012 at 5:18 PM, Tully Foote wrote: > I'm not sure on timing. The 9:40 sounds reasonable, but I'm sure we didn't > sync at 8am. There might have been an issue with the sync yesterday which > was fixed by the sync this morning. I think I saw some differences in the > Precise 64 output when syncing. > > For buildfarm things configurations I recommend using shadow-fixed. It's > slightly less stable, but it's generally better to know earlier that things > are going to fail. > > Tully > > > On Thu, Dec 20, 2012 at 5:03 PM, Brian Gerkey > wrote: >> >> hi Tully, >> >> OK, that's good to know. >> >> But did you sync twice today? Because this happened to me during my >> own development this morning, around 8am, and again to one of our >> Jenkins builds, around 9.40am. >> >> In general, do you recommend our Jenkins builds hit the public repo or >> shadow-fixed? >> >> Btw, `apt-get update` had been done in both cases, right before the >> install attempt. >> >> brian. >> >> On Thu, Dec 20, 2012 at 4:55 PM, Tully Foote >> wrote: >> > Hi Brian, >> > >> > No it's not expected and I think you unfortunately hit during a sync. >> > It >> > takes a few minutes for us to resync everything across. Also if we have >> > synced since you last updated you will get 404s when trying to install >> > or >> > upgrade, until you next update. >> > >> > The status page is looking good: http://www.ros.org/debbuild/fuerte.html >> > >> > And a spot check of the raw files shows std-msgs is present and happy: >> > http://packages.ros.org/ros/ubuntu/pool/main/r/ros-fuerte-std-msgs/ >> > >> > Tully >> > >> > >> > On Thu, Dec 20, 2012 at 4:40 PM, Brian Gerkey >> > wrote: >> >> >> >> hi guys, >> >> >> >> Today I noticed something that has happened periodically in the past: >> >> I try to install something that depends on ROS packages and it fails >> >> because things are missing from the public ('ros') repo. If I switch >> >> to shadow-fixed, everything's good. >> >> >> >> Today, I found the following things missing: >> >> >> >> ros-fuerte-pr2-mechanism >> >> ros-fuerte-std-msgs >> >> ros-fuerte-common-msgs >> >> ros-fuerte-image-common >> >> ros-fuerte-geometry >> >> ros-fuerte-pr2-controllers >> >> ros-fuerte-geometry-experimental >> >> ros-fuerte-robot-model-visualization >> >> ros-fuerte-image-pipeline >> >> >> >> There's some pretty important stuff in that list. Is this expected? I >> >> would think that we'd want to be sure that such core packages are >> >> present in shadow-fixed before syncing to public. >> >> >> >> brian. >> >> _______________________________________________ >> >> Ros-release mailing list >> >> Ros-release@code.ros.org >> >> https://code.ros.org/mailman/listinfo/ros-release >> > >> > >> > >> > >> > -- >> > Tully Foote >> > tfoote@willowgarage.com >> > (650) 475-2827 > > > > > -- > Tully Foote > tfoote@willowgarage.com > (650) 475-2827