Peter,

> Am 08.07.2015 um 10:22 schrieb Peter Rudolph via ros-users <ros-users@lists.ros.org>:
> 
> Before ROSCON 2013 I did similiar things. I implemented a lightweight ROS in C. Had also an IMU demo with an STM32F4 board ;-) ... I posted this in the SIG embedded, but did not have any time to maintain it. So how ready is your stuff (I will have a look into repo later) ? Do you also have a code generator for standard ROS message generation in C (as single header file, like me did)? I used standard serial (RS-232 or USB) to communicate between uC and PC, and managed to use the available ROS-Serial pc-node to use my uC.

could you provide a link to what you had at the time?


thanks in advance

Michael

> Regards,
> Peter
> 
> 2015-07-07 15:07 GMT+02:00 Yigit Gunay via ros-users <ros-users@lists.ros.org>:
> Hello everyone,
> 
> We are developing a lightweight implementation of the ROS middleware on STM32F4Discovery for interfacing embedded and general-purpose software. Currently, we can run multiple ROS nodes concurrently on STM32, and we can send ROS messages between a PC and STM32 over Ethernet (only UDPROS).
> 
> Please take a look at our repository on Github if you are interested in our real-time ROS development: https://github.com/bosch-ros-pkg/stm32.
> 
> I would appreciate your comments. Thanks for your attention!
> 
> Best regards,
> Yigit Gunay
> _______________________________________________
> ros-users mailing list
> ros-users@lists.ros.org
> http://lists.ros.org/mailman/listinfo/ros-users
> 
> _______________________________________________
> ros-users mailing list
> ros-users@lists.ros.org
> http://lists.ros.org/mailman/listinfo/ros-users

_______________________________________________
ros-users mailing list
ros-users@lists.ros.org
http://lists.ros.org/mailman/listinfo/ros-users