Thanks! We are using the hardware JPEG compression available in the Pi, so getting both compressed and uncompressed images is tricky. Because of this, we only publish the compressed image so that we can continue to take advantage of the hardware. If you need raw images, for now you will have to run a separate decompression node like so `rosrun image_transport republish compressed in:=/raspicam_node/image raw out:=/raspicam_node/image` in order to get raw images. Of course these raw images will have the same compression artifacts as the raw image. If that is not enough for you, please open an issue on you github repo above, and we will try to support your use case. Rohan --- [Visit Topic](https://discourse.ros.org/t/raspberry-pi-camera-node/1388/8) or reply to this email to respond. If you do not want to receive messages from ros-users please use the unsubscribe link below. If you use the one above, you will stop all of ros-users from receiving updates. ______________________________________________________________________________ ros-users mailing list ros-users@lists.ros.org http://lists.ros.org/mailman/listinfo/ros-users Unsubscribe: