Hi All, I've been putting together a ROS+OpenCV robot kit for hobbyist ie "Makers". What does that mean? Well the thought is - simple ROS software stack that can be extended but relatively easy to kick off and have the "hardware" to something hello-worldy quickly; tolerant to a level of "scrappiness" ie wires hanging out, not drop-proof tolerant; lastly economical and extensible using hardware that's readily available via any of your favorite online sources. Under the name ROSbots, [we blogged a bit more about the kit on our Medium page](https://medium.com/@rosbots/ros-opencv-robot-kit-for-makers-7e22d91b4fd7). Love to hear the communities thoughts and feedback. Thanks! Jack "ROSbots Maker" --- [Visit Topic](https://discourse.ros.org/t/raspberry-pi-ros-opencv-robot-kit-for-makers/3747/1) or reply to this email to respond. If you do not want to receive messages from ros-users please use the unsubscribe link below. If you use the one above, you will stop all of ros-users from receiving updates. ______________________________________________________________________________ ros-users mailing list ros-users@lists.ros.org http://lists.ros.org/mailman/listinfo/ros-users Unsubscribe: