Just FYI, the webui is experimental. Patches are welcome.

Check your version of firefox. It needs to be 3.5 or 3.6. I don't think it
works with Chrome or IE.

You can also reset the web interface. Log in to c1, and run "sudo
/etc/init.d/apache2/stop; sudo /etc/init.d/apache2/start". After you do
that, you may have to log in again.

Kevin


On Thu, Jul 15, 2010 at 8:33 AM, <mwitt341@aol.com> wrote:

>  Yes I did that.
>
> Max
>
>
>
>  -----Original Message-----
> From: Adam Stambler <adasta@gmail.com>
> To: ros-users <ros-users@code.ros.org>
> Sent: Wed, Jul 14, 2010 4:56 pm
> Subject: Re: [ros-users] Webui "unable to connect to robot computers" error
>
>  Hi Max,
>
>  Did you use :
>
>  roslaunch webui webui.launch
>
>  to bring up the rosnodes which communicate with the WebUI?
>
>  -Adam
>
>  On Wed, Jul 14, 2010 at 1:38 PM, <mwitt341@aol.com> wrote:
>
>>  After several seconds of being logged into webui and seeing "Connecting
>> to robot computers", I am told that webui is "Unable to connect to robot
>> computers". The Robot's name is shown and I am able to navigate the site.
>> Where is webui trying to access the robot? Could this be due to the fact
>> that gHomeServer is set to None in the wrong thing in the webui's config.py
>> file? Thanks
>>
>> Max
>>
>> _______________________________________________
>> ros-users mailing list
>> ros-users@code.ros.org
>> https://code.ros.org/mailman/listinfo/ros-users
>>
>>
>   _______________________________________________
>
>
> ros-users mailing list
>
> ros-users@code.ros.org
>
> https://code.ros.org/mailman/listinfo/ros-users
>
>
>
>
> _______________________________________________
> ros-users mailing list
> ros-users@code.ros.org
> https://code.ros.org/mailman/listinfo/ros-users
>
>