Wow I can't believe that error was due to an old version of firefox. Thanks a lot. Max -----Original Message----- From: Kevin Watts To: ros-users Sent: Thu, Jul 15, 2010 10:57 am Subject: Re: [ros-users] Webui "unable to connect to robot computers" error Just FYI, the webui is experimental. Patches are welcome. Check your version of firefox. It needs to be 3.5 or 3.6. I don't think it works with Chrome or IE. You can also reset the web interface. Log in to c1, and run "sudo /etc/init.d/apache2/stop; sudo /etc/init.d/apache2/start". After you do that, you may have to log in again. Kevin On Thu, Jul 15, 2010 at 8:33 AM, wrote: Yes I did that. Max -----Original Message----- From: Adam Stambler To: ros-users Sent: Wed, Jul 14, 2010 4:56 pm Subject: Re: [ros-users] Webui "unable to connect to robot computers" error Hi Max, Did you use : roslaunch webui webui.launch to bring up the rosnodes which communicate with the WebUI? -Adam On Wed, Jul 14, 2010 at 1:38 PM, wrote: After several seconds of being logged into webui and seeing "Connecting to robot computers", I am told that webui is "Unable to connect to robot computers". The Robot's name is shown and I am able to navigate the site. Where is webui trying to access the robot? Could this be due to the fact that gHomeServer is set to None in the wrong thing in the webui's config.py file? Thanks Max _______________________________________________ ros-users mailing list ros-users@code.ros.org https://code.ros.org/mailman/listinfo/ros-users _______________________________________________ ros-users mailing list ros-users@code.ros.org https://code.ros.org/mailman/listinfo/ros-users _______________________________________________ ros-users mailing list ros-users@code.ros.org https://code.ros.org/mailman/listinfo/ros-users _______________________________________________ ros-users mailing list ros-users@code.ros.org https://code.ros.org/mailman/listinfo/ros-users