You _can_ do homebrew and macports at the same time, but there can be complications, like if your homebrew packages try to link against libraries from macports rather than the system ones, but homebrew was expecting the system one. Usually you can work around those issues, but really you'll just have to try it out. You could also build opencv-2.3.1 from source. It is pretty easy to do, you can see my changes to the homebrew formula for opencv-2.3.1 here: https://github.com/wjwwood/homebrew/commit/41093ac462243224869b68473dd277a2b5ae4e3a and you can probably work out how to build opencv manually from that file. I will try to install and test the openni stuff later this week. Later, ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ William Woodall Graduate Software Engineering Auburn University w@auburn.edu wjwwood@gmail.com williamjwoodall.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ On Mon, Aug 29, 2011 at 7:51 AM, Kevin Walchko wrote: > William, > > I haven't had much luck with kinect and the drivers from openni.org for > OSX. I asked how others are doing it on answers.ros.org so maybe someone > can point me in the right direction. > > I am trying to get electric up and running (but still a slave to macports), > used your patch to fix rosconsole --- thanks! > > So far I have changed all of the rosdep.yaml entries for python to 2.7 and > added a bunch of missing macports comments for other libraries with no > problems so far. OpenCV though is my next hurdle. I see both macports and > homebrew both don't have 2.3 and electric wants it. So my question now is: > > Can I leave macports in tact but use homebrew only for opencv 2.3? I am > under the impression I should only use macports or homebrew. Just want to > make sure I don't hose my system. > Thanks. > > Kevin > > > On Aug 24, 2011, at 5:04 PM, William Woodall wrote: > > Kevin, I haven't even touched the Kinect yet, but the ROS interface, last I > checked, uses the openni driver. I know that there is a release of openni > for OS X, but I cannot comment on its quality. I would imagine that there > should be no major road blocks to getting the Kinect, and related packages, > working in ROS on OS X, but there might be some small fixes needed. If you > like, you can try to get the Kinect working in OS X and if you run into > specific issues I would be happy to help you through them. Having the > Kinect work on the mac is of interest to me because of my research, but I > don't have time to go down that road right now. > > Hope that helps, > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > William Woodall > Graduate Software Engineering > Auburn University > w@auburn.edu > wjwwood@gmail.com > williamjwoodall.com > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > > > On Wed, Aug 24, 2011 at 7:39 AM, Kevin Walchko wrote: > >> William, >> >> Thanks for all of your hard work. Question, your instructions don't >> reference the Kinect, unless I missed it somewhere. Have you looked to see >> if that is working on Lion with ROS electric? >> Thanks. >> >> Kevin >> >> >> On Aug 23, 2011, at 9:13 PM, William Woodall wrote: >> >> To add to what John said, no this is not going to be as easy as Linux for >> now (we are working on that). OpenCV should work, and usb cameras might >> work, but I haven't tried them. >> >> I don't know about the make eclipse-project command not working, could you >> give more detail on this (errors?)? >> >> Also, the wiki page is out of date, use these directions: >> https://github.com/wjwwood/ros-osx/blob/master/electric-lion-homebrew/README.md >> >> I would say that OS X right now is not ready for production work if you >> want rviz and the like to work. If you are looking to get things done I >> would recommend using Linux until OS X support improves a little more over >> the next few months. >> >> Hope that helps, >> >> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ >> William Woodall >> Graduate Software Engineering >> Auburn University >> w@auburn.edu >> wjwwood@gmail.com >> williamjwoodall.com >> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ >> >> >> >> On Tue, Aug 23, 2011 at 10:35 PM, John Harrison wrote: >> >>> Did you follow the instructions on >>> https://github.com/wjwwood/ros-osx/tree/master/electric-lion-homebrew ? >>> >>> William and I have been working to get everything working on OS X, at >>> this point we have made progress but its not as well tested as the linux >>> distributions. >>> >>> >>> https://github.com/wjwwood/ros-osx/wiki/ROS,-Electric-Emys,-on-OS-X-10.7-Lion-using-HomebrewHas a list of the packages we have gotten to work with OS X 10.7. >>> >>> On Tue, Aug 23, 2011 at 10:17 PM, Carlos J. wrote: >>> >>>> I'm trying to use ROS in MacOSX after successfully installing (not >>>> completely tested yet...stuff like rviz doesn't work...Ogre is ugly to >>>> install and it fails through macports). I'm not sure what to expect ...will >>>> other things be as simple to just install and play like in Linux? Will >>>> OpenCV work? will my uvc cameras work? >>>> >>>> I would like people's opinions about this transition (please, don't bash >>>> me for the ridiculous question). I would like to have a feel of how many >>>> actual mac users are having ROS working successfully. As I said, my roscore >>>> works and got the desktop-full install fine (no errors), but I ran into the >>>> case where rviz is there but it's NOT there really... >>>> >>>> Why does stuff like "make eclipse-project" doesn't work in here? >>>> >>>> Thanks for the positive/negative vibes to whoever feels my position. >>>> >>>> Carlos >>>> >>>> _______________________________________________ >>>> ros-users mailing list >>>> ros-users@code.ros.org >>>> https://code.ros.org/mailman/listinfo/ros-users >>>> >>>> >>> >>> >>> -- >>> John Harrison >>> >>> _______________________________________________ >>> ros-users mailing list >>> ros-users@code.ros.org >>> https://code.ros.org/mailman/listinfo/ros-users >>> >>> >> _______________________________________________ >> ros-users mailing list >> ros-users@code.ros.org >> https://code.ros.org/mailman/listinfo/ros-users >> >> >> >> _______________________________________________ >> ros-users mailing list >> ros-users@code.ros.org >> https://code.ros.org/mailman/listinfo/ros-users >> >> > _______________________________________________ > ros-users mailing list > ros-users@code.ros.org > https://code.ros.org/mailman/listinfo/ros-users > > > > _______________________________________________ > ros-users mailing list > ros-users@code.ros.org > https://code.ros.org/mailman/listinfo/ros-users > >