Output is as follows:

[FATAL] [1320680361.313360376]: number of position models and laser models
must be equal in the world file.
[FATAL] [1320680361.313471845]: BREAKPOINT HIT
    file =
/tmp/buildd/ros-diamondback-simulator-stage-1.2.5/debian/ros-diamondback-simulator-stage/opt/ros/diamondback/stacks/simulator_stage/stage/src/stageros.cpp
    line=207

Line 207 in the current stageros.cpp file does not contain the code to
provide this output.

On Mon, Nov 7, 2011 at 10:32 AM, Brian Gerkey <gerkey@willowgarage.com>wrote:

> On Mon, Nov 7, 2011 at 6:35 AM, Eliot Beckham <webeckham@gmail.com> wrote:
> > I appreciate it, Brian. Slight issue: after installing the patch,
> rosmaking
> > stage and attempting to run the .world with a pioneer, it's triggering
> the
> > same error as before. The error itself refers to a piece of code that
> should
> > have been erased by the patch. I've pre-cleaned it, tried different
> > approaches to rosmake, and gone through the code to make sure its
> > compilable. Any idea as to what might be the problem?
>
> I'd need to see the full error output to provide advice.
>
>        brian.
>
> > On Mon, Oct 24, 2011 at 11:57 AM, Brian Gerkey <gerkey@willowgarage.com>
> > wrote:
> >>
> >> On Mon, Oct 24, 2011 at 6:19 AM, Eliot Beckham <webeckham@gmail.com>
> >> wrote:
> >> > I've been trying to use the GUI simulator "stage" to run a demo of a
> >> > pioneer
> >> > robot within ROS. Stage is setup within its code, stageros.cpp, not
> >> > specifically to function with the default virtual robot class defined
> in
> >> > stage (roomba.inc), but with a robot using an array of lasers - a
> >> > pioneer
> >> > robot (defined within pioneer.inc) uses only a sonar array. Stage
> works
> >> > just
> >> > fine when simulating a roomba, and still constructs the world when run
> >> > before hitting a fatal error. Is there any sort of patch or
> modification
> >> > to
> >> > stageros.cpp that can be made in order to run stage using a robot
> with a
> >> > sonar array?
> >>
> >> hi Eliot,
> >>
> >> As the docs say (http://www.ros.org/wiki/stage#World_syntax), the ROS
> >> wrapper for Stage only exposes `laser` and `position` models.  There's
> >> an (embarrassingly old) patch that adds support for sonar:
> >> https://code.ros.org/trac/ros-pkg/ticket/4487.
> >>
> >> I'll make sure that we enable sonar support for Fuerte, as part of the
> >> upgrade to Stage 4.x.
> _______________________________________________
> ros-users mailing list
> ros-users@code.ros.org
> https://code.ros.org/mailman/listinfo/ros-users
>



-- 
Eliot Beckham