Hi Bill - Thanks for the great contribution. It would be great if you could link these off the TurtleBot installation/upgrade page on the ROS wiki so that others could find this documentation more easily. Thanks -Melonee On Tue, Jul 31, 2012 at 9:29 PM, Bill Phillips wrote: > Also, I apparently can’t spell “turtlebot” consistently. Sheesh….**** > > ** ** > > Bill**** > > ** ** > > *From:* ros-users-bounces@code.ros.org [mailto: > ros-users-bounces@code.ros.org] *On Behalf Of *Bill Phillips > *Sent:* Tuesday, July 31, 2012 9:23 PM > *To:* ros-users@code.ros.org > *Subject:* [ros-users] Fuerte install notes - turtlebot**** > > ** ** > > Attached are some rough notes I made about a clean install of Fuerte on a > Turtlebot and a developer workstation. I am using a turtlebot with the > Lenovo x130e laptop so this is specific to that setup. > > I apologize in advance for not attributing the information correctly, as > most of it was pulled from ROS.org or it's peers (answers.ros.org, etc.) > during my installation and testing. This is still in rough draft form but I > wanted to get it out there to see if it was helpful or not. I intend a more > complete draft with proper attribution in the near future. > > I can say from my little experience with ROS and the turtlebot that fuerte > is easier to set up and rviz is leaps and bounds above what it was in > electric. Well, at least for me. :) > > Thanks in advance for taking a look at this. > > Bill**** > > _______________________________________________ > ros-users mailing list > ros-users@code.ros.org > https://code.ros.org/mailman/listinfo/ros-users > > -- Manager of Robot Development Intern Program Director Willow Garage 68 Willow Rd. Menlo Park, Ca 94025