Map->odom 10.245 Hz
Odom->Base 10.209 Hz
Base->Laser 30.203 Hz
(according to view_frames)

Odom->base is being published from the B21 node, which also publishes joint states, which go through an aggregator node to the robot_state_publisher node, which publishes base->laser. 

I should note, I had been running these tests with only the B21 node on the robot, and the rest running on a different machine. Putting everything on the robot did lead to some success. 

-David!!




On Thu, Apr 22, 2010 at 9:13 AM, Brian Gerkey <gerkey@willowgarage.com> wrote:
On Wed, Apr 21, 2010 at 6:11 PM, David Lu!! <davidvlu@gmail.com> wrote:

> tf view_frames shows everything connected. The most concerning part is that
> the map->odom and odom->base transforms are 1.564 sec old.
> The problem remains that setting the pose in nav_view does not actually
> change the pose. The laser scans are now showing up as obstacles around the
> robot's footprint, but that footprint is in the wrong spot. I've solved that
> by making transform_tolerance: 10 on the costmaps. That doesn't quite seem
> like the right approach. How else can I speed up my tfs?

hi David,

How are you publishing the odom->base and base->laser transforms?  If
one or both of them is being published too slowly, it could lead to
the problems that you're seeing.

       brian.
_______________________________________________
ros-users mailing list
ros-users@code.ros.org
https://code.ros.org/mailman/listinfo/ros-users