On Thu, Sep 16, 2010 at 6:06 AM, Martijn Hazenberg
<mhazenberg75@gmail.com> wrote:
Hi all,
For our developments we would like to hook up 2 webcams to Ros and make them visible in our own gui.
From http://www.iheartrobotics.com/2010/05/testing-ros-usb-camera-drivers.html we learned that starting with USB_CAM package would be advised, so we did.
We started with a clean USB_CAM package.
When we started the package with rosrun usb_cam usb_cam_node, we found that we had select timeout, everytime we started it.
To overcome this we increased the timeout to app. 15 sec. since we read somewhere that the driver init process takes quite a lot of time (somehow).
The new problem is, dat the package will fail most of time with the following error:
:~/ros_packages/usb_cam/src/usb_cam_node$ rosrun usb_cam usb_cam_node
usb_cam video_device set to [/dev/video0]
usb_cam io_method set to [mmap]
usb_cam image_width set to [640]
usb_cam image_height set to [480]
usb_cam pixel_format set to [yuyv]
VIDIOC_S_FMT error 5, Input/output error
:~/ros_packages/usb_cam/src/usb_cam_node$
in dmesg the last entry then is:
[ 595.814126] uvcvideo: Failed to set UVC probe control : -110 (exp. 26).
When i change the image size in the usb_cam_node code from 640x480 to 800x600 I get:
:~/ros_packages/usb_cam/src/usb_cam_node$ rosrun usb_cam usb_cam_node
usb_cam video_device set to [/dev/video0]
usb_cam io_method set to [mmap]
usb_cam image_width set to [800]
usb_cam image_height set to [600]
usb_cam pixel_format set to [yuyv]
select timeout
:~/ros_packages/usb_cam/src/usb_cam_node$
or after another restart:
:~/ros_packages/usb_cam/src/usb_cam_node$ rosrun usb_cam usb_cam_node
usb_cam video_device set to [/dev/video0]
usb_cam io_method set to [mmap]
usb_cam image_width set to [800]
usb_cam image_height set to [600]
usb_cam pixel_format set to [yuyv]
VIDIOC_S_FMT error 5, Input/output error
:~/ros_packages/usb_cam/src/usb_cam_node$
again, dmesg provides the same message as before.
when i change the image size to 320x240 most of the times it will give me the same error :
VIDIOC_S_FMT error 5, Input/output error
but sometimes it will correctly start :
:~/ros_packages/usb_cam/src/usb_cam_node$ rosrun usb_cam usb_cam_node
usb_cam video_device set to [/dev/video0]
usb_cam io_method set to [mmap]
usb_cam image_width set to [320]
usb_cam image_height set to [240]
usb_cam pixel_format set to [yuyv]
1 frames/sec at 1284642005.985820517
1 frames/sec at 1284642006.993781394
1 frames/sec at 1284642008.011523040
When it entually does work, we're able to see the image with rosrun image_view image_view
rosrun image_view image_view image :=/usb_cam/image_raw
Any idea on what the problem is here ?
The camera is working, verified with guvcview under all different formats.
Thanks
Martijn
_______________________________________________
ros-users mailing list
ros-users@code.ros.org
https://code.ros.org/mailman/listinfo/ros-users