Yeah, I finished my adaption of the driver LMS200 of PlayerStage, to use with the Laser PLS200-212.

First I modify the driver sicklms200 for use with the laser pls200 in Player, and later I create a "driver/node" for ROS, and Works!!!!!

I attached a image using the laser in Player with playerv, and ROS with Rviz.....

http://dl.dropbox.com/u/2548197/pls200_ros_player.jpeg

Best regards...


2010/10/25 Aaron Martinez Romero <aaronmartinezromero@gmail.com>
Hi Blaise, thanks for respond.

I saw the documentation of sicktoolbox and my laser model, is not supported.

I think that is a lot of work to modify the sicktoolbox and sicktoolbox_wrapper driver for the PLS200 Laser.

I saw that the driver sick_lms400 is based in a driver of Player, I will try use this method with my laser with the driver of Player that I modified.

Best regards...

2010/10/25 Blaise Gassend <blaise@willowgarage.com>

Hi Aaron,

The current ROS LMS driver uses the sicktoolbox. So my first questions
to you would be:

- Does sicktoolbox support the PLS200-214? If it does, then tweaking
the sicktoolbox_wrapper driver should allow the PLS to work. (It might
also be necessary to update the version of sicktoolbox that is pulled
by the sicktoolbox package.)

- Can sicktoolbox be modified to support the PLS200-214? From what you
write, you were easily able to upgrade the player driver to work with
the PLS. If that's the case, I imagine that sicktoolbox can be
similarly enhanced.

If neither of those options works, it should be relatively easy to get
the Player driver working with ROS. You just have to call ros_init to
create a ROS node, advertise a topic, copy the data into a message,
and publish that message. I imagine you may also have to take out some
player-specific code.

I think that there may also be some player to ROS bridges out there
that might allow you to use the player driver directly.

Blaise

On Mon, Oct 25, 2010 at 5:57 AM, Aaron Martinez Romero
<aaronmartinezromero@gmail.com> wrote:
> Hello,
>
> Anybody know if this laser have a driver for ROS??? ( Laser sick PLS200-214
> )
>
> http://dl.dropbox.com/u/2548197/PLS200-214-comp.jpg
>
> If not, Which is the steps for program a driver for this Laser.
>
> I modified the driver of the Player for the Laser LMS200 and the Laser is
> working with Player,  Can I use this driver for ROS???
>
> Thanks.
> Best regards...
>
> --
> Atentamente,
> Aarón Martínez Romero
> Ingeniero en Informática
> Tlf: 600 283 349
> http://www.AaronMR.com
>
> _______________________________________________
> ros-users mailing list
> ros-users@code.ros.org
> https://code.ros.org/mailman/listinfo/ros-users
>
>
_______________________________________________
ros-users mailing list
ros-users@code.ros.org
https://code.ros.org/mailman/listinfo/ros-users



--
Atentamente,
Aarón Martínez Romero
Ingeniero en Informática
Tlf: 600 283 349
http://www.AaronMR.com



--
Atentamente,
Aarón Martínez Romero
Ingeniero en Informática
Tlf: 600 283 349
http://www.AaronMR.com