[ros-users] Ubuntu packages dependencies

[Tully Foote]

Hi Konrad,
That is on our roadmap going forward.
http://www.ros.org/wiki/diamondback/Planning

In general if you are space constrained it is recommended to create your own
rosinstall file and remove unneeded dependencies and use a source based
install.  If you start with something like this
http://www.ros.org/rosinstalls/cturtle_pr2.rosinstall  and then remove the
parts you don't want and add your own packages you can create a much smaller
footprint for the install.

In the future when we split things apart more, if you really are space
constrained, this will remain the recommended way to install for there will
always be some parts of the system which are unneeded for a particular setup
but are installed by default.

Tully

On Tue, Aug 31, 2010 at 12:18 PM, Konrad Banachowicz <konradb3 at gmail.com>wrote:

> Hi,
> I recently started moving our mobile robots toward ROS.
> But i had some problems with heavy dependencies on ROS binary packages.
> Our robots are build around embedded PC104 PC with 4GB CF drive.
> We use it with minimal installation of ubuntu linux.
>
> When i tried to install ROS from repo, i realized that only ros-cturtle-ros
> require more than 1GB of dependencies.
> Many core ROS packages depends on X11, texlive, wx, opengl ... , witch are
> useless on board of mobile robot.
>
> I think that the GUI utilities should be separated from their stacks, that
> fine-grained packaging will make packaging system more flexible.
>
> Pozdrawiam
> Konrad Banachowicz
>
> _______________________________________________
> ros-users mailing list
> ros-users at code.ros.org
> https://code.ros.org/mailman/listinfo/ros-users
>
>


-- 
Tully Foote
Systems Engineer
Willow Garage, Inc.
tfoote at willowgarage.com
(650) 475-2827
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ros.org/pipermail/ros-users/attachments/20100831/f3eda26f/attachment-0003.html>