[ros-users] base_local_planner

Eitan Marder-Eppstein eitan at willowgarage.com
Thu May 27 18:16:19 UTC 2010


Eric,

That ticket didn't include the linear case originally, but it does now.
Thanks for pointing it out. The PR2 has such high acceleration limits that
its easy for me to overlook this stuff, but it really matters for robots
with lower acceleration limits.

Hope all is well,

Eitan

On Thu, May 27, 2010 at 11:09 AM, Eric Perko <wisesage5001 at gmail.com> wrote:

> Eitan,
>
> Does that ticket also include taking into account linear decelerations
> as well as rotational limits? I've been using the TrajectoryPlanner
> with reasonable acceleration limits for my differential drive robot
> (say 0.25 m/s^2 for acc_limit_x) and, while we seem to accelerate
> smoothly, upon reaching a goal within tolerance the system sends
> abrupt halt commands. Does the TrajectoryPlanner expect another piece
> of software to modulate the speeds to account for safe deceleration or
> should I be seeing smooth deceleration as the robot approaches the
> goal?
>
> - Eric
>
> On Thu, May 27, 2010 at 2:00 PM, Eitan Marder-Eppstein
> <eitan at willowgarage.com> wrote:
> > Andreas,
> >
> > This could be due to the fact that the rotate to goal code doesn't take
> the
> > robot's acceleration limits into account. There's actually a ticket open
> > against it here: https://code.ros.org/trac/ros-pkg/ticket/3127 that got
> a
> > bit lost in the pile. I'm going to change the priority on it to make sure
> > that I get to it in the next week or so since it seems to be affecting
> you.
> >
> > Hope all is well,
> >
> > Eitan
> >
> >
> > On Thu, May 27, 2010 at 12:13 AM, Andreas Vogt <andreas.vogt at dfki.de>
> wrote:
> >>
> >> Hi,
> >> I am running my planner with this parameters:
> >>
> >> TrajectoryPlannerROS:
> >>  max_vel_x: 0.2
> >>  min_vel_x: 0.01
> >>  max_rotational_vel: 0.23
> >>  min_in_place_rotational_vel: 0.01
> >>
> >>  acc_limit_th: 0.05
> >>  acc_limit_x: 0.05
> >>  acc_limit_y: 0.05
> >>
> >>  holonomic_robot: false
> >>
> >> but sometimes it seems that the velocity (angular.z here omega) jumps
> >> without account for the acceleration. In my case from zero to
> >> max_rotational_vel.
> >>
> >>
> >> Any ideas ?
> >>
> >> Andreas
> >>
> >>
> >>
> >>
> >>
> >> [ERROR] 170.700000000: ICP: 0.000000 VEL: 0.000000 OMEGA: 0.230000
> >> 0.000000
> >> [ERROR] 170.754000000: ICP: 0.000000 VEL: 0.000000 OMEGA: 0.230000
> >> 0.000000
> >> [ERROR] 170.805000000: ICP: 0.000000 VEL: 0.000000 OMEGA: 0.173355
> >> 0.000000
> >> [ERROR] 170.855000000: ICP: 0.000000 VEL: 0.000000 OMEGA: 0.173355
> >> 0.000000
> >> [ERROR] 170.902000000: ICP: 0.000000 VEL: 0.000000 OMEGA: 0.173355
> >> 0.000000
> >> [ERROR] 170.952000000: ICP: 0.000000 VEL: 0.000000 OMEGA: 0.173355
> >> 0.000000
> >> [ERROR] 171.003000000: ICP: 0.000000 VEL: 0.000000 OMEGA: 0.140928
> >> 0.000000
> >> [ERROR] 171.053000000: ICP: 10.000000 VEL: 0.105000 OMEGA: 0.000000
> >> 0.000000
> >> [ERROR] 171.118000000: ICP: 10.000000 VEL: 0.105000 OMEGA: 0.000000
> >> 0.000000
> >> [ERROR] 171.152000000: ICP: 10.000000 VEL: 0.105000 OMEGA: 0.000000
> >> 0.000000
> >> [ERROR] 171.201000000: ICP: 10.000000 VEL: 0.105000 OMEGA: 0.000000
> >> 0.000000
> >> [ERROR] 171.250000000: ICP: 10.000000 VEL: 0.105000 OMEGA: 0.000000
> >> 0.000000
> >> [ERROR] 171.302000000: ICP: 10.000000 VEL: 0.105000 OMEGA: 0.000000
> >> 0.000000
> >> [ERROR] 171.353000000: ICP: 10.000000 VEL: 0.105000 OMEGA: 0.000000
> >> 0.000000
> >> [ERROR] 171.401000000: ICP: 0.000000 VEL: 0.010000 OMEGA: -0.230000
> >> 0.000000
> >> [ERROR] 171.450000000: ICP: 0.000000 VEL: 0.010000 OMEGA: -0.230000
> >> 0.000000
> >> [ERROR] 171.501000000: ICP: 0.000000 VEL: 0.010000 OMEGA: -0.230000
> >> 0.000000
> >> [ERROR] 171.550000000: ICP: 0.000000 VEL: 0.010000 OMEGA: -0.230000
> >> 0.000000
> >> [ERROR] 171.609000000: ICP: 0.000000 VEL: 0.010000 OMEGA: -0.230000
> >> 0.000000
> >>
> >>
> >>
> >>
> >> _______________________________________________
> >> ros-users mailing list
> >> ros-users at code.ros.org
> >> https://code.ros.org/mailman/listinfo/ros-users
> >
> >
> > _______________________________________________
> > ros-users mailing list
> > ros-users at code.ros.org
> > https://code.ros.org/mailman/listinfo/ros-users
> >
> >
> _______________________________________________
> ros-users mailing list
> ros-users at code.ros.org
> https://code.ros.org/mailman/listinfo/ros-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ros.org/pipermail/ros-users/attachments/20100527/093f1ecd/attachment-0004.html>


More information about the ros-users mailing list