[ros-users] Prosilica GC1020

Blaise Gassend blaise at willowgarage.com
Fri Nov 5 21:51:19 UTC 2010

I think he was hoping that Rene would tell him about what he had to
disable in the redhat firewall to get things working.

Steven, have you tried disabling your firewall completely to see if that helps?

On Fri, Nov 5, 2010 at 11:21 AM, Patrick Mihelich
<mihelich at willowgarage.com> wrote:
> On Fri, Nov 5, 2010 at 8:44 AM, Steven Bellens
> <steven.bellens at mech.kuleuven.be> wrote:
>> I'm experiencing this issue here now as well. The camera reponds on
>> pings, but ListCameras doesn't detect it. Same goes with the provided
>> SampleViewer application from prosilica: I find the camera on IP basis
>> - but the app is not listing it automatically. I've checked the wiki
>> page and followed all tutorials.
>> Can you give me any instructions on how to solve this problem?
> This is a separate issue. Your camera is probably hooked up via a switch.
> This is a limitation of the Prosilica SDK; it can only enumerate cameras
> with IP address on a local subnet. If the camera is not on the local IP
> subnet, you can still open it, but you have to know the IP address ahead of
> time. This is why we have the "How to Determine Your Camera's IP Address"
> tutorial, in case the camera isn't visible to the SDK and you've forgotten
> its IP address. As long as you can open the camera using the
> prosilica_camera node with ~ip_address set correctly, there's nothing to
> worry about.
> Cheers,
> Patrick
> _______________________________________________
> ros-users mailing list
> ros-users at code.ros.org
> https://code.ros.org/mailman/listinfo/ros-users

More information about the ros-users mailing list