[ros-users] Is pr2_arm_navigation_actions package used for all arms?

[Morgan Quigley]

I would advise against using that package in its current form. If you
would like to bring it up to date, I would suggest copying it to a
repository that you control. After that, I would be happy to delete it
from ours. We haven't used that package in over a year, and have no
future plans to maintain it; I left it up mostly to serve as a
starting point in case someone wanted to pick it up. The "kni" package
that the error refers to is the library provided by the manufacturer
(Neuronics); the katana450 package was just a wrapper around that. But
again, this will take nontrivial time to make it usable again.

-Morgan


On Wed, Nov 10, 2010 at 11:58 AM, safdar_zaman <safdaraslam at yahoo.com> wrote:
>
> Hi Jones,
> Thanks for reply.
> I followed the urdf tutorial. its understandable. I found a package
> katana450 on
> https://sail-ros-pkg.svn.sourceforge.net/svnroot/sail-ros-pkg/trunk/experimental/drivers/katana450/
> . As the arm with me is Katana450 6M 180 so I downloaded the katana450
> package. Then I change to katana450 directory and rosmake it , I get
> following error:
>
> [ rosmake ] Packages requested are: ['katana450']
> [ rosmake ] Logging to
> directory/home/safdar/.ros/rosmake/rosmake_output-20101110-205455
> [ rosmake ] Expanded args ['katana450'] to:
> ['katana450']
> [ rosmake ] Checking rosdeps compliance for packages katana450.  This may
> take a few seconds.
> Failed to find stack for package [kni]
> Failed to load rosdep.yaml for package [kni]:Cannot locate installation of
> package kni: [rospack] couldn't find package [kni].
> ROS_ROOT[/opt/ros/cturtle/ros] ROS_PACKAGE_PATH[/opt/ros/cturtle/stacks]
> [ rosmake ] rosdep check passed all system dependencies in packages
> [rosmake-0] Starting >>> katana450 [ make ]
> [rosmake-1] Starting >>> roslang [ make ]
> [rosmake-1] Finished <<< roslang ROS_NOBUILD in package roslang
>  No Makefile in package roslang
> [rosmake-1] Starting >>> roslib [ make ]
> [rosmake-1] Finished <<< roslib ROS_NOBUILD in package roslib
> [rosmake-1] Starting >>> xmlrpcpp [ make ]
> [rosmake-1] Finished <<< xmlrpcpp ROS_NOBUILD in package xmlrpcpp
> [rosmake-1] Starting >>> rosconsole [ make ]
> [rosmake-1] Finished <<< rosconsole ROS_NOBUILD in package rosconsole
> [rosmake-1] Starting >>> roscpp [ make ]
> [rosmake-1] Finished <<< roscpp ROS_NOBUILD in package roscpp
> [rosmake-1] Starting >>> rosout [ make ]
> [rosmake-1] Finished <<< rosout ROS_NOBUILD in package rosout
> [ rosmake ] All 8 lines
> {-------------------------------------------------------------------------------
>  mkdir -p bin
>  cd build && cmake -Wdev -DCMAKE_TOOLCHAIN_FILE=`rospack find
> rosbuild`/rostoolchain.cmake  ..
>  CMake Error at CMakeLists.txt:3 (rospack):
>    Unknown CMake command "rospack".
>
>
>  -- Configuring incomplete, errors occurred!
> -------------------------------------------------------------------------------}
> [ rosmake ] Output from build of package katana450 written to:
> [ rosmake ]
> /home/safdar/.ros/rosmake/rosmake_output-20101110-205455/katana450/build_output.log
> [rosmake-0] Finished <<< katana450 [FAIL] [ 0.05 seconds ]
> [ rosmake ] Halting due to failure in package katana450.
> [ rosmake ] Waiting for other threads to complete.
> [ rosmake ] Results:
> [ rosmake ] Built 9 packages with 1 failures.
> [ rosmake ] Summary output to directory
> [ rosmake ] /home/safdar/.ros/rosmake/rosmake_output-20101110-205455
>
>
> I have also CD with driver KNI 4.0.0 . Any solution to make everything
> runnable via katana450 package??
> thanks
> --
> View this message in context: http://ros-users.122217.n3.nabble.com/Is-pr2-arm-navigation-actions-package-used-for-all-arms-tp1877170p1878295.html
> Sent from the ROS-Users mailing list archive at Nabble.com.
> _______________________________________________
> ros-users mailing list
> ros-users at code.ros.org
> https://code.ros.org/mailman/listinfo/ros-users
>