[ros-users] problems modifying teleop_wiimote tutorial

[jovi wap]

Thank you for your ideas Blaise,

Finally I solved and you were right. The launch file was running a
non.modified node (turtle_teleop). Finally I understand how it works.

Best regards!

2010/8/31 Blaise Gassend <blaise at willowgarage.com>

> > The problem is that any change i do in the code does not make any
> difference
> > in the behavior of the node.
>
> When I read this, my first thought is: are you 100% sure you are
> actually running your modified code? Did you run make? Is roslaunch
> pulling your package from the wrong place? (If you have a package you
> installed from a debian, and an overlay that you made your changes in,
> are you quite sure that the shell you are roslaunching from has your
> version of the package in ROS_PACKAGE_PATH? You can try using roscd
> from the shell you are roslaunching from to see where roslaunch is
> finding your package.)
>
> Have you tried putting some ROS_INFO commands in your code to make
> sure they get displayed wher you run it?
>
> Blaise
> _______________________________________________
> ros-users mailing list
> ros-users at code.ros.org
> https://code.ros.org/mailman/listinfo/ros-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osuosl.org/pipermail/ros-users/attachments/20100901/42d6a5a2/attachment-0002.html>