[ros-users] ROS driver supporting Sparkfun IMU

[Adam Stambler]

Hi,

Just an IMU won't be able to track the position of the IMU over time.  It
can be combined with odometry measurements with a kalman filter to a decent
estimate though.

If you are looking for a sparkfun IMU with a premade ros-wrapper, I have a
wrapper for the sparkfun 9d razor
<http://www.sparkfun.com/products/9623>imu called
imu_9drazor <http://www.ros.org/wiki/imu_9drazor>.  It is a part of the
rutgers-ros-pkg.

Regards,
Adam

On Mon, Jan 10, 2011 at 11:58 PM, abhy <abhy.12354 at gmail.com> wrote:

>
> hello,
>
> Does ROS have Sparkfun IMU supporting driver?
> "
> http://www.robotshop.com/sfe-atomic-imu-6-degrees-of-freedom-xbee-ready-1.html
> "
>
> Is this IMU sufficient for giving X, Y, Z coordinates of the Robot?
>
> Thanks,
> Abhy
> --
> View this message in context:
> http://ros-users.122217.n3.nabble.com/ROS-driver-supporting-Sparkfun-IMU-tp2232681p2232681.html
> Sent from the ROS-Users mailing list archive at Nabble.com.
> _______________________________________________
> ros-users mailing list
> ros-users at code.ros.org
> https://code.ros.org/mailman/listinfo/ros-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ros.org/pipermail/ros-users/attachments/20110111/1d7b3f2c/attachment-0003.html>