[ros-users] Problems with rosbags in Electric on Oneiric

[Ahlberg Rasmus]

Oh, OK. "rosbag fix" helped. Thanks!

/Rasmus Ahlberg

-----Original Message-----
From: ros-users-bounces at code.ros.org [mailto:ros-users-bounces at code.ros.org] On Behalf Of Bhaskara Marthi
Sent: den 30 oktober 2011 17:45
To: User discussions
Subject: Re: [ros-users] Problems with rosbags in Electric on Oneiric

This seems to be a general problem, not just on Oneiric, with rosbag on electric.  A ticket has been created at https://code.ros.org/trac/ros/ticket/3727.
- Bhaskara

On Sun, Oct 30, 2011 at 9:24 AM, Ahlberg Rasmus <rasmus.ahlberg at combitech.se> wrote:
> Hi,
> I managed to install the Electric version of ROS on Oneiric by using 
> the Natty repo. However, my rosbag recordings are much larger than 
> they used to be. Also, running "rosbag info" on them takes 10-15 
> seconds instead of being almost instantaneous. Has anyone else experienced this problem?
>
> I've noticed that there seems to be one connection per message, 
> according to the "rosbag info" printout. Previously in 
> Diamondback+Natty I only had 5 or so, even if there were several 
> thousands of messages. Now they match one-to-one. Is this normal in Electric?
>
> Didn't want to put up a question on answers.ros.org, as I assume this 
> isn't a supported setup.
>
> Regards,
> Rasmus Ahlberg
>
>
> _______________________________________________
> ros-users mailing list
> ros-users at code.ros.org
> https://code.ros.org/mailman/listinfo/ros-users
>
>



--
Bhaskara Marthi
Research Scientist
Willow Garage Inc.
650-475-2856
_______________________________________________
ros-users mailing list
ros-users at code.ros.org
https://code.ros.org/mailman/listinfo/ros-users