[ros-users] The future of ROS 2.0 protocol changes

Ingo Lütkebohle iluetkeb at gmail.com
Mon Sep 15 13:07:04 UTC 2014

I think Odeste has a point in requesting that the core question is answered

That said, my original understanding was that, while new APIs are
introduced, there would be backwards compatibility. For example,
design.ros2.org site states
"But fear not: there will be mechanisms in place to allow ROS 2.0 code to
coexist with existing ROS code. At the very least, there will be
translation relays that will support run-time interactions between the two
systems. And it is possible that there will be library shims that will
allow existing ROS code to compile/run against ROS 2.0 libraries, with
behavior that is qualitatively similar to what is seen today."

If that happens, it seems as if that should be okay for existing ROS users
who are for some reason unable or unwilling to migrate to the new APIs.

I was not personally at ROSCon this year, but was there anything said that
contradicts this statement?

On Mon, Sep 15, 2014 at 2:59 PM, Jenkins, Odest Chadwicke <
cjenkins at cs.brown.edu> wrote:

> Hi Tully,
> I would like this discussion to continue on ros-users and address Aaron's
> core question:
> "Why would a researcher/developer invest resources into a platform that
> was going to completely change nullifying their personal investment in that
> platform?"
> This is a huge question and source of uncertainty for current ROS users.
>  As stated, this decision "can make or break ROS in the future."  Given the
> constant changes in ROS from distribution to distribution, it is unclear
> whether this change of protocol will lead to greater stability and
> interoperability, or become a unwise investment of time and resources.
> ROS has been an invaluable contribution to moving robotics forward.  Your
> work and the work of OSRF has enabled a large ecosystem of open-source
> robotics, which is tremendously appreciated.  Within that ecosystem, many
> people have care deeply about ROS.  They have invested themselves in ROS
> and its future.
> Thus, pushing this discussion off to a SIG list would a disservice to
> those of us who are concerned about this core question in possibly
> transitioning between ROS and ROS 2.0.
> -Chad
> Date: Sun, 14 Sep 2014 14:58:29 -0700
> From: Tully Foote <tfoote at osrfoundation.org>
> To: Aaron Sims <aaron at happyartist.net>, User discussions
>         <ros-users at lists.ros.org>
> Subject: Re: [ros-users] The future of ROS 2.0 protocol changes
> Message-ID:
>         <CAM7qi7UwvjVjYtSbnpMrUcAKg1yO=
> qeAjDhNKN0H_Ldo3+rFZQ at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
> Hi Aaron,
> Thanks for your input. Would you mind reposting this on the ros-sig-ng-ros
> https://groups.google.com/forum/?fromgroups#!forum/ros-sig-ng-ros that's
> the best location for discussing the ROS 2.0 efforts. We'd like to keep the
> ROS 2.0 discussions together so we can have a cohesive archive of the
> discussions.
> And as announced before I encourage anyone who's interested in this topic
> to join that SIG.
> Tully
> On Sun, Sep 14, 2014 at 1:40 PM, Aaron Sims <aaron at happyartist.net> wrote:
> > Dear ROS Teams,
> > Thanks for an informative time at ROSCon 2014. I had to leave about an
> hour and a half early to catch a flight, and I was left with my head
> spinning about the the decision to change protocols in ROS 2.0. This is an
> important decision, and I will share my concerns, as well as my thoughts on
> a direction I personally would of taken with ROS 2.0, and the protocol
> directions. This topic seems better fit for a blog, however, an open
> discussion is important.
> > First let me say the direction of ROS 2.0 makes sense, the complete
> shift to ROS DDS protocol does not seem wise. There are many good reasons
> to implement DDS in ROS, however, the way it is implemented can make or
> break ROS in the future.
> > Many well intended protocol implementations end up at dead ends. Two
> examples are: HTTP NG (Next Generation) <
> http://www.w3.org/Protocols/HTTP-NG/Activity.html>
> http://www.w3.org/Protocols/HTTP-NG/Activity.htmlGnutella 2 <
> http://en.wikipedia.org/wiki/Gnutella2>
> http://en.wikipedia.org/wiki/Gnutella2
> > I'd like to share the approach of the Happy Artist RMDMIA RCSM (Robot
> Control System Messenger) API. The RCSM implements a plugin architecture
> that allows multiple robot operating system clients to be
> registered/accessed, run simultaneously, and inter operate together, or
> simply to plugin a single client such as the Happy Artist ROS Client for
> TCPROS/UDPROS.  As a ROS user this allows any protocol to plugin, and work
> from any 3rd party vendor DDS implementation, TCPROS/UDPROS, or any other
> protocol. In the Happy Artist RMDMIA implementation the RCSM component
> serves as an interface to the rest of the system so that protocols can
> change, while code written for autonomous/user control follows the same
> pattern, allowing interchangeability, and forward/backward compatibility
> between other aspects of the system. If ROS were to approach 2.0
> >  like this, libraries like MoveIt (an example of a library name (no idea
> if it is tied to TCPROS/UDPROS protocols in ROS 1.0 implementation), could
> run on any communication protocol without ever needing to know anything
> about the protocols it was operating on. This approach needs to be applied
> to all areas of the system so that a user of any component can interchange
> their libraries to ROS 2.0 for 100% forward, and backward compatibility.
> > I am personally concerned that researchers may find themselves using ROS
> alternatives due to the time/money that will be lost while they wait for a
> viable ROS 2.0 solution. Why would a researcher/developer invest resources
> into a platform that was going to completely change nullifying their
> personal investment in that platform?
> > It is evident ROS 2.0 needs support similar to ACID transactions for
> autonomous robotics that the DDS implementation will support (primarily for
> people safety, and system stability of commercialized autonomous systems).
> > It is a bad, bad idea to throw the current ROS users under the bus in
> the interim. The implementation architecture direction for ROS 2.0 I am
> suggesting alleviates this scenario, and allows ROS to backtrack a little
> with its users to continue improving ROS 1.0 functionality in TCPROS, and
> >
> > In the interim here are some ROS 1.0 improvements that could greatly
> improve ROS performance with substantial latency decrease, while increasing
> data bandwidth:
> >
> > Add support for UDPROS on every ROS supported client, and server with a
> few minor enhancements. (Some of these suggestions came out of the BOF at
> ROSCon discussion on latency and performance, and some I have been
> attempting to subtly hint at with multiple questions on ROS Answers over
> the last year).
> >
> > *UDP Jumbogram support:* This is a very simple enhancement. Allow
> unbounded UDP Datagram sizes, and during protocol handshake (XMLRPC
> negotiation in UDPROS), and add a flag to the publisher configuration that
> says allow UDP jumbogram support, or specify the maximum datagram size. ROS
> currently puts their datagram size limit around 1500 bytes. If the system
> hardware supports jumbograms, the only change is supporting a configurable
> maximum datagram size.
> > *UDP Multicast support:* Adding a header attribute called multicast
> could allow a topic or service (not aware service is currently supported
> for UDPROS, but it should be) to configure the associated Publisher to
> perform a broadcast (A concern of multiple subscribers to a topic causing a
> major problem with system performance can be alleviated with a feature
> request by a person in the BOF get together for specifying the numeric
> limit to subscribers of a particular topic).  Note: (Based on my personal
> UDPROS implementation experience, adding Multicast support would be fairly
> simple to add into the Happy Artist Java client, so I assume the same might
> apply on other platforms that have UDPROS support).
> > *Maximum Topic Subscribers support:* Allow the the system designer to
> specify the maximum number of subscribers on any given topic. The use case
> given was a high bandwidth topic that multiple users subscribe to and cause
> the system to hang. The user wanted to implement a UDPROS topic with
> Multicast support for a single subscriber. Note: Based on my personal
> knowledge of the CPP client (somewhat limited), the client uses low level
> arrays rather than Data Collection Objects, therefore the incremental
> nature of arrays in CPP code should make this task fairly straight forward
> to implement.
> > If you have any questions or would like to have further discussion, I
> look forward to discussion.
> >
> > Sincerely,
> >
> > Aaron
> >
> >
> >
> > _______________________________________________
> > ros-users mailing list
> > ros-users at lists.ros.org
> > http://lists.ros.org/mailman/listinfo/ros-users
> >
> >
> _______________________________________________
> ros-users mailing list
> ros-users at lists.ros.org
> http://lists.ros.org/mailman/listinfo/ros-users

Ingo Lütkebohle, Dr.-Ing.

PGP Fingerprint 3187 4DEC 47E6 1B1E 6F4F  57D4 CD90 C164 34AD CE5B
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ros.org/pipermail/ros-users/attachments/20140915/4a51ebe4/attachment.html>

More information about the ros-users mailing list