[ros-users] [Discourse.ros.org] [TurtleBot] OpenCR Software Setup

[Janis Seglenieks]

Can't add TurtleBot3 Firmware to OpenCR following Docs, get error. What could be the problem?

Arduino: 1.8.5 (Linux), Board: "OpenCR Board, OpenCR Bootloader"

In file included from /home/seeggel/Arduino/libraries/ros_lib/ros.h:39:0,
                 from sketch/turtlebot3_core_config.h:24,
                 from /home/seeggel/.arduino15/packages/OpenCR/hardware/OpenCR/1.0.13/libraries/turtlebot3/turtlebot3_burger/turtlebot3_core/turtlebot3_core.ino:19:
/home/seeggel/Arduino/libraries/ros_lib/ArduinoHardware.h: In constructor 'ArduinoHardware::ArduinoHardware()':
/home/seeggel/Arduino/libraries/ros_lib/ArduinoHardware.h:76:16: error: cannot convert 'USBSerial*' to 'HardwareSerial*' in assignment
       iostream = &Serial;
                ^
Multiple libraries were found for "ros.h"
 Used: /home/seeggel/Arduino/libraries/ros_lib
 Not used: /home/seeggel/.arduino15/packages/OpenCR/hardware/OpenCR/1.0.13/libraries/turtlebot3_ros_lib
exit status 1
Error compiling for board OpenCR Board.

This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.





---
[Visit Topic](https://discourse.ros.org/t/opencr-software-setup/2851/1) or reply to this email to respond.