[ros-users] Collisions Outside the Bounding Box (planning_environment)
David Lu!!
davidvlu at gmail.com
Mon Aug 9 22:26:36 UTC 2010
After narrowing down my model, I've found at least one bug that was causing
me problems.
https://code.ros.org/trac/wg-ros-pkg/ticket/4629
<https://code.ros.org/trac/wg-ros-pkg/ticket/4629>Short Version: Collision
detection ignores the scale of meshes
On Fri, Aug 6, 2010 at 1:52 PM, Sachin Chitta <sachinc at willowgarage.com>wrote:
> On Fri, Aug 6, 2010 at 1:26 PM, David Lu!! <davidvlu at gmail.com> wrote:
> >> (1) This is difficult to debug without more information. One thing you
> >> could do is display the pose of the robot corresponding to the last
> >> collision in rviz. This tutorial -
> >>
> http://www.ros.org/wiki/motion_planning_environment/Tutorials/Tutorial%20B
> >> - helps you do that.
> >>
> > I've been running off
> > of
> http://www.ros.org/wiki/motion_planning_environment/Tutorials/Tutorial%20A
> ,
> > except with my own robot and no laser data, so I know exactly what pose
> the
> > collisions are happening in.
>
> True, but the pose that the planning_environment is checking
> collisions for might not represent the one you are sending in. Doing
> this will show you where the collision environment thinks the robot is
> - if there's a potential bug here we might catch it this way.
>
> Can you send me a snapshot in rviz with collision display enabled. It
> looks like (from the marker message), PIECE1 is colliding with PIECE2
> in BASE_FRAME. Where is BASE_FRAME defined with respect to PIECE1 and
> PIECE2 - maybe send me a urdf as well?
>
> Sachin
>
>
>
>
>
> >
> >>
> >> (2) Also, using the rviz "select" button, you can click on the markers
> >> and they will give you more information on what is colliding.
> >>
> > Good to know.
> >
> >>
> >> (3) Are you moving the base of the robot around? We are working
> >> towards a release that handles motion of the robot base properly - the
> >> current collision environment is not yet fully tested for motion of
> >> the base.
> >>
> > No. I'm only running GetStateValidity with one static pose.
> > _______________________________________________
> > ros-users mailing list
> > ros-users at code.ros.org
> > https://code.ros.org/mailman/listinfo/ros-users
> >
> >
>
>
>
> --
> Sachin Chitta
> Research Scientist
> Willow Garage
> _______________________________________________
> ros-users mailing list
> ros-users at code.ros.org
> https://code.ros.org/mailman/listinfo/ros-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ros.org/pipermail/ros-users/attachments/20100809/4be882e6/attachment-0003.html>
More information about the ros-users
mailing list