[ros-users] Loading a model in Rviz, Robot Model vs. State Validity
Josh Faust
jfaust at willowgarage.com
Thu Aug 12 18:41:53 UTC 2010
My guess is that the update rate is the problem. It's trying to do 1204 TF
transforms every cycle through a 33hz loop. Try this:
1) load rviz without the urdf on the parameter server
2) create a Robot Model display
3) set the "Update Interval" to 1 -- this means it's only going to update
the model once a second
4) load the urdf onto the parameter server
5) disable/re-enable the robot model display
Josh
On Thu, Aug 12, 2010 at 11:33 AM, David Lu!! <davidvlu at gmail.com> wrote:
> If my calculations are correct, I have 174 meshes with almost 300,000
> facets.
>
>
> On Thu, Aug 12, 2010 at 11:25 AM, Josh Faust <jfaust at willowgarage.com>wrote:
>
>> How big are the meshes themselves?
>>
>>
>> On Thu, Aug 12, 2010 at 11:07 AM, David Lu!! <davidvlu at gmail.com> wrote:
>>
>>> Sadly, I can't share it with you just yet. But it is 1204 links, all
>>> meshes. 1.3MB.
>>> -David
>>>
>>>
>>> On Thu, Aug 12, 2010 at 11:01 AM, John Hsu <johnhsu at willowgarage.com>wrote:
>>>
>>>> Hi David!!,
>>>> How large is it, and can you share your URDF for us to try it out?
>>>> John
>>>>
>>>> On Thu, Aug 12, 2010 at 10:58 AM, David Lu!! <davidvlu at gmail.com>wrote:
>>>>
>>>>> Hey all,
>>>>> I have yet another URDF question.
>>>>>
>>>>> I have a rather large URDF which I'm attempting to view in Rviz. Using
>>>>> the State Validity visualizer, the whole model appears, no problem. However,
>>>>> when I try to see it using the Robot Model visualizer, it essentially never
>>>>> appears, slowly eating up all of my memory before anything can appear.
>>>>>
>>>>> Has anyone else run into this or have insight into why it might be?
>>>>>
>>>>> -David!!
>>>>>
>>>>> _______________________________________________
>>>>> ros-users mailing list
>>>>> ros-users at code.ros.org
>>>>> https://code.ros.org/mailman/listinfo/ros-users
>>>>>
>>>>>
>>>>
>>>> _______________________________________________
>>>> ros-users mailing list
>>>> ros-users at code.ros.org
>>>> https://code.ros.org/mailman/listinfo/ros-users
>>>>
>>>>
>>>
>>> _______________________________________________
>>> ros-users mailing list
>>> ros-users at code.ros.org
>>> https://code.ros.org/mailman/listinfo/ros-users
>>>
>>>
>>
>> _______________________________________________
>> ros-users mailing list
>> ros-users at code.ros.org
>> https://code.ros.org/mailman/listinfo/ros-users
>>
>>
>
> _______________________________________________
> ros-users mailing list
> ros-users at code.ros.org
> https://code.ros.org/mailman/listinfo/ros-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ros.org/pipermail/ros-users/attachments/20100812/26319acc/attachment-0003.html>
More information about the ros-users
mailing list