[ros-users] Pr2 Front Bottom Panel Removal

[Melonee Wise]

Can you take a picture o what you want to remove?

-Melonee

On Jun 21, 2010, at 4:34 PM, Adam Stambler <adasta at gmail.com> wrote:

> Hi,
>
> We are trying to remove the PR2 front Bottom Panel and want to make  
> sure we are taking it off correctly.  Are there screws securing the  
> panel or does it just clip in?  If there are screws, which screws on  
> the outside belong to the panel?  If there are clips, what is the  
> best position pull/push in to remove the panel?
>
> Thank you for the help, in the future I will post these questions to  
> the PR2-users mailing list.
>
> Regards,
> Adam Stambler
>
> On Mon, Jun 21, 2010 at 4:23 PM, Adam Stambler <adasta at gmail.com>  
> wrote:
> Hello,
>
> We are trying to remove the PR2 front Bottom Panel and want to make  
> sure we are taking it off correctly.  Are there screws securing the  
> panel or does it just clip in?  If there are screws, which screws on  
> the outside belong to the panel?  If there are clips, what is the  
> best position pull/push in to remove the panel?
>
>
> Regards,
> Adam Stambler
>
>
>
> _______________________________________________
> ros-users mailing list
> ros-users at code.ros.org
> https://code.ros.org/mailman/listinfo/ros-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ros.org/pipermail/ros-users/attachments/20100621/ac197b8a/attachment-0003.html>