[ros-users] wavefront

Eitan Marder-Eppstein eitan at willowgarage.com
Wed Mar 31 00:55:52 UTC 2010


Hey Dan,

A few questions for ya to help figure out what's going on:

1) Have you tried using the rxconsole tool to see if any useful information
is being output from the system? If so, did you see anything that seemed to
be complaining or giving warnings?

2) What launch files are you running on the erratic? Are they the ones in
the 2dnav_erratic package? Or different ones that you created? We used to
have an erratic in-house, but we don't anymore and its been awhile since the
2dnav_erratic package has been tested. If you're running with your own
configuration, could you post the files so I can take a look at them?

3) Do you see any obstacles in nav_view? On second thought, rviz is a more
powerful debugging tool for this kind of stuff. Have you tried using rviz to
get useful debugging information (whether obstacles show up, a plan is
created, etc)? You can find a tutorial on using rviz with the navigation
stack here:
http://www.ros.org/wiki/navigation/Tutorials/Using%20rviz%20with%20the%20Navigation%20Stack


Ok... take a shot at answering these and we'll see if that gives a bit more
insight into what's going on.

Hope all is well,

Eitan

On Tue, Mar 30, 2010 at 3:57 PM, Dan Lazewatsky
<lazewatskyd at cse.wustl.edu>wrote:

>  Thanks for the response Eitan -
> I've created a map, and am trying to get an erratic to navigate in said map
> using nav_view. I set up the robot according the the nav robot setup
> tutorial, and when I run nav view I can see the map and set the robot's
> initial pose, but trying to set the goal doesn't seem to do anything. I get
> a printout from nav view saying "setting goal: Position(...)" but that's
> all.
>
> -Dan
>
>
> On 3/30/10 4:31 PM, Eitan Marder-Eppstein wrote:
>
> Dan,
>
> The wavefront package has fallen into a bit of disrepair as we favor our
> move_base package for autonomous navigation. If you're looking to run some
> autonomous navigation demos, check out the move_base_stage package instead
> of the 2dnav_stage package. The 2dnav_stage package will probably be removed
> in the near future to save people the confusion.
>
> Hope this helps,
>
> Eitan
>
> On Tue, Mar 30, 2010 at 12:07 PM, Dan Lazewatsky <
> lazewatskyd at cse.wustl.edu> wrote:
>
>> Hi all - I'm having some trouble using wavefront. When I try to start it I
>> get this:
>>
>> robotics at tears$ rosrun wavefront wavefront
>> terminate called after throwing an instance of 'ros::InvalidNameException'
>>   what():  Using ~ names with NodeHandle methods is not allowed.  If you want to use private names with the NodeHandle interface, construct a NodeHandle using a private name as its namespace.  e.g. ros::NodeHandle nh("~");  nh.getParam("my_private_name"); (name = [~dist_eps])
>> /home/robotics/ros/ros/bin/rosrun: line 35: 15562 Aborted                 $exepath "$@"
>>
>> Granted, I don't know what the right way to use wavefront since the
>> documentation is a bit spotty.
>>
>> Any ideas would be appreciated.
>>
>> Thanks,
>> -Dan
>>
>> _______________________________________________
>> ros-users mailing list
>> ros-users at code.ros.org
>> https://code.ros.org/mailman/listinfo/ros-users
>>
>>
>
> _______________________________________________
> ros-users mailing listros-users at code.ros.orghttps://code.ros.org/mailman/listinfo/ros-users
>
>
> _______________________________________________
> ros-users mailing list
> ros-users at code.ros.org
> https://code.ros.org/mailman/listinfo/ros-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ros.org/pipermail/ros-users/attachments/20100330/512e0784/attachment-0003.html>


More information about the ros-users mailing list