[ros-users] erratic gazebo path planning
Tully Foote
tfoote at willowgarage.com
Fri May 7 19:43:35 UTC 2010
Hitesh,
I expect that you have not configured the costmap to receive your incoming
laser data. This would explain why you are not seeing inflated obstacles.
The planner uses the costmap to plan, which is empty so it returns a
straight plan.
Tully
On Thu, May 6, 2010 at 5:08 AM, hitesh dhiman
<hitesh.dhiman.1988 at gmail.com>wrote:
> Hi all,
> I'm trying to run the erratic gazebo path planning, using the willow garage
> map provided.
> I'm using all custom parameters. However, the path planning seems to be
> faltering. It is actually planning a path through the wall, I've also
> attached a picture showing the path planning.
> Also, the inflated costmap is not being displayed, although the messages
> are being published and the rviz status says ok.
> Any idea what might be wrong?
>
>
> --
> Regards,
> Hitesh Dhiman
> Electrical Engineering
> National University of Singapore
>
> _______________________________________________
> ros-users mailing list
> ros-users at code.ros.org
> https://code.ros.org/mailman/listinfo/ros-users
>
>
--
Tully Foote
Systems Engineer
Willow Garage, Inc.
tfoote at willowgarage.com
(650) 475-2827
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ros.org/pipermail/ros-users/attachments/20100507/1f16294b/attachment-0003.html>
More information about the ros-users
mailing list