[ros-users] dynamic reconfigure tutorial or example?

[Soonhac Hong]

Adam,

You may also look over camera1394 which has a simple dynamic reconfigure.

Best,
Soonhac

On 5/28/2010 11:46 PM, John Hsu wrote:
> Adam,
> As an example, you can take a look at changes in r29517 trunk for 
> gazebo_plugins, there I added dynamic reconfigure for hokuyo which 
> does nothing at all.
> John
>
> On Fri, May 28, 2010 at 8:27 PM, Adam Leeper <aleeper at stanford.edu 
> <mailto:aleeper at stanford.edu>> wrote:
>
>     Hi all-
>
>     Is there an example or tutorial for writing a node in c++ that can
>     be reconfigured using dynamic reconfigure? I've been trying to
>     look at the Hokuyo node code as an example, which is fairly dense
>     because of all the driver stuff in there too. Is there a
>     lighter-weight node that would serve as a good example of using
>     dynamic reconfigure?
>
>     Thanks,
>     Adam
>
>
>
>     Adam Leeper
>     Stanford University
>     aleeper at stanford.edu <mailto:aleeper at stanford.edu>
>     719.358.3804
>
>     _______________________________________________
>     ros-users mailing list
>     ros-users at code.ros.org <mailto:ros-users at code.ros.org>
>     https://code.ros.org/mailman/listinfo/ros-users
>
>
>
> _______________________________________________
> ros-users mailing list
> ros-users at code.ros.org
> https://code.ros.org/mailman/listinfo/ros-users
>    

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ros.org/pipermail/ros-users/attachments/20100529/536e298a/attachment-0003.html>