[ros-users] How can I load models from Google SketUp ????
Aaron Martinez Romero
aaronmartinezromero at gmail.com
Wed Feb 9 15:21:08 UTC 2011
Thanks Joan, all ok now.
I use this:
*scale="0.025 0.025 0.025"*
and now I see the piece with the correct dimension.
best regards.
2011/2/9 Joan Oliver <joan.oliver at pal-robotics.com>
> Hi Aaron,
>
> Maybe SketchUp is exporting the model in mm. You can use the optional
> scale <http://www.ros.org/wiki/urdf/XML/Link> parameter for meshes in the
> URDF.
>
> Hope this helps,
> Joan
>
>
>
> On Wed, Feb 9, 2011 at 1:30 PM, Aaron Martinez Romero <
> aaronmartinezromero at gmail.com> wrote:
>
>> yes, was problem of the route, now is working but I have now another
>> problem with the dimension of the model:
>>
>> the model made in sketchup have the same dimension that the model from
>> example urdf_tutorial, I mean length 0.6 meters and radios 0.2 meters.
>>
>> the base link:
>> <link name="base_link">
>> <visual>
>> <geometry>
>> <cylinder length="0.6" radius="0.2"/>
>> </geometry>
>> <material name="blue">
>> <color rgba="0 0 .8 1"/>
>> </material>
>> </visual>
>> </link>
>>
>> but in rviz I see a big cylinder much more bigger than the
>> base_link.......
>>
>> http://dl.dropbox.com/u/2950889/tube.png
>> http://dl.dropbox.com/u/2950889/sizeError.png
>>
>> http://dl.dropbox.com/u/2950889/tube.dae
>> http://dl.dropbox.com/u/2950889/r2d2.urdf
>>
>> What am I doing bad?
>>
>>
>> 2011/2/5 John Hsu <johnhsu at willowgarage.com>
>>
>> Hi Aaron,
>>> Couple of questions. Which COLLADA version is your dae file? Can you
>>> post your urdf file and the dae file? Also, as a sanity check, try below
>>> and make sure the file exists:
>>>
>>> ls `rospack find urdf_tutorial`/mymodel.dae
>>>
>>> hope this helps.
>>> John
>>>
>>>
>>> On Fri, Feb 4, 2011 at 3:44 AM, Aaron Martinez Romero <
>>> aaronmartinezromero at gmail.com> wrote:
>>>
>>>> Hi everyone,
>>>>
>>>> Somebody know how can I load in my urdf a model from google sketup?? I
>>>> am exporting the model in dae file, but I always obtain this error message:
>>>>
>>>> [ERROR] [1296819682.438922687]: Could not load resource
>>>> [package://urdf_tutorial/mymodel.dae]: Collada:
>>>> package://urdf_tutorial/mymodel.dae - Expected opening element
>>>> [ERROR] [1296819682.439516423]: Could not load model
>>>> 'package://urdf_tutorial/mymodel.dae' for link 'right_leg': OGRE
>>>> EXCEPTION(6:FileNotFoundException): Cannot locate resource
>>>> package://urdf_tutorial/mymodel.dae in resource group Autodetect or any
>>>> other group. in ResourceGroupManager::openResource at
>>>> /tmp/buildd/ros-cturtle-visualization-common-1.2.0/debian/ros-cturtle-visualization-common/opt/ros/cturtle/stacks/visualization_common/ogre/build/ogre_src_v1-7-1/OgreMain/src/OgreResourceGroupManager.cpp
>>>> (line 753)
>>>>
>>>>
>>>> If I use other model, like "<mesh
>>>> filename="package://pr2_description/meshes/gripper_v0/l_finger.dae"/>"
>>>> works.
>>>>
>>>> Best regards.
>>>> --
>>>> Atentamente,
>>>> Aarón Martínez Romero
>>>> Ingeniero en Informática
>>>> Tlf: 600 283 349
>>>> http://www.AaronMR.com
>>>>
>>>> _______________________________________________
>>>> ros-users mailing list
>>>> ros-users at code.ros.org
>>>> https://code.ros.org/mailman/listinfo/ros-users
>>>>
>>>>
>>>
>>> _______________________________________________
>>> ros-users mailing list
>>> ros-users at code.ros.org
>>> https://code.ros.org/mailman/listinfo/ros-users
>>>
>>>
>>
>>
>> --
>> Atentamente,
>> Aarón Martínez Romero
>> Ingeniero en Informática
>> Tlf: 600 283 349
>> http://www.AaronMR.com
>>
>> _______________________________________________
>> ros-users mailing list
>> ros-users at code.ros.org
>> https://code.ros.org/mailman/listinfo/ros-users
>>
>>
>
>
> --
> Joan Oliver Poyatos
> Manipulation Department
> Pal Robotics S.L.
>
> Tel: +34.93.414.53.47
> Fax: +34.93.209.11.09
> C/ Pujades 77-79 4º 4ª 08005 Barcelona, Spain.
> http://www.pal-robotics.com/
>
>
> AVISO DE CONFIDENCIALIDAD: Este mensaje y sus documentos adjuntos, pueden
> contener información privilegiada y/o confidencial que está dirigida
> exclusivamente a su destinatario. Si usted recibe este mensaje y no es el
> destinatario indicado, o el empleado encargado de su entrega a dicha
> persona, por favor, notifíquelo inmediatamente y remita el mensaje original
> a la dirección de correo electrónico indicada. Cualquier copia, uso o
> distribución no autorizados de esta comunicación queda estrictamente
> prohibida.
>
> CONFIDENTIALITY NOTICE: This e-mail and the accompanying document(s) may
> contain confidential information which is privileged and intended only for
> the individual or entity to whom they are addressed. If you are not the
> intended recipient, you are hereby notified that any disclosure, copying,
> distribution or use of this e-mail and/or accompanying document(s) is
> strictly prohibited. If you have received this e-mail in error, please
> immediately notify the sender at the above e-mail address.
>
> _______________________________________________
> ros-users mailing list
> ros-users at code.ros.org
> https://code.ros.org/mailman/listinfo/ros-users
>
>
--
Atentamente,
Aarón Martínez Romero
Ingeniero en Informática
Tlf: 600 283 349
http://www.AaronMR.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ros.org/pipermail/ros-users/attachments/20110209/66ca430d/attachment-0003.html>
More information about the ros-users
mailing list