[ros-users] Capability of ARM dev board for ROS host
Armstrong-Crews, Nicholas - 1002 - MITLL
nickarmstrongcrews at ll.mit.edu
Fri Jan 13 16:29:41 UTC 2012
Kent,
Since you're interested in using a beagleboard and/or android phone as a robot brain, I'm guessing you want the robot to be cheap, small, or both. These are actually very different!
1) if cheap: spend your time finding/ROS-ifying/writing your own nav and slam packages. I've found move_base and gmapping to be very CPU-intensive (since gmapping is multi-hypothesis, and move_base's local planner is a forward simulator). They work great w/ a consumer laptop (thanks, WG!), but were not really designed for low-spec hardware. Potential field local planner + A* global planner + Karto for SLAM used much less CPU for similar performance.
2) if small: invest in one or more hokuyo laser range finders; or if you really want vision-only, get some panoramic cameras (like PointGrey's ladybug) or a bunch of standard pinhole cameras pointing in all directions (like Google's streetview car), or a more reasonable number of stereo cams (like PointGrey's bumblebee).
3) if both: drastically reduce your expectations of what tasks the robot can perform :)
I would offer a grim warning: beware sending Kinect or uncompressed video or even high-res compressed video over a wireless link (to be processed by a heftier off-board robot brain). Unless you have an uncrowded 300 Mbps connection and are within line-of-sight, your link will get hosed and all tubes will be clogged (not just the /video topic).
Cheers,
-Nick
PS - @ros-users: is there a better way, e.g. a wiki, to make public these discussions on "how should I make a robot of type X with ROS" ?
From: ros-users-bounces at code.ros.org [mailto:ros-users-bounces at code.ros.org] On Behalf Of Kent Williams
Sent: Friday, January 13, 2012 4:30 AM
To: User discussions
Subject: Re: [ros-users] Capability of ARM dev board for ROS host
Thanks for the thoughts Arjun,
At the moment I have the headless ubuntu 11.10 on the beagleboard so no X window. I'll just end up testing how many substantial nodes I can get running nicely, but ultimately it's looking like these are just not suited to be the main workhorse just yet.
On Fri, Jan 13, 2012 at 1:03 AM, Arjun Arumbakkam <akarjun at gmail.com<mailto:akarjun at gmail.com>> wrote:
Hi Kent,
It depends on what linux distribution you are using on your board. If you use a full fledged Ubuntu distribution, your processor and memory is going to be loaded and there will be little room for other processes.
That said, if you use a lightweight Ubuntu distribution such as Lxde with Lxdm, you could have room for more computation. We've used a Gumstix Overo board with lxde and lxdm to run a roscore, olsr with two wifi interfaces and a rosnode (with minor computation) and still found the X interface quite responsive. It could have handled some image processing as well, but we ran localization, planning, control and image processing nodes offboard on a beefy laptop like Damon suggested in his email. The Gumstix Overo uses an ARM Cortex A8 core with 512 MB, same as the beagleboard. You could go one up by using just a console image without X. That might give you more room for image processing, etc.
-Arjun.
On Fri, Jan 13, 2012 at 3:38 AM, Kent Williams <k3nt00 at gmail.com<mailto:k3nt00 at gmail.com>> wrote:
It is our hope to make the robot a standalone unit, and therefore not require any off board infrastructure. I know this is quite a vague question, I'm really just looking to see if anyone has hit the wall big time with the capabilities of these boards or if there is hope for leaning them down enough and slowing down the update frequencies to get by. I have been considering to attempt to use a decent android phone I have as the image sensor and processing resource node using rosjava, since the vision requirements are low. Then possibly the beagleboard or pandaboard would be sufficient for hosting the rest.
--
Kent Williams
k3nt00 at gmail.com<mailto:k3nt00 at gmail.com>
(818)203-4394<tel:%28818%29203-4394>
_______________________________________________
ros-users mailing list
ros-users at code.ros.org<mailto:ros-users at code.ros.org>
https://code.ros.org/mailman/listinfo/ros-users
_______________________________________________
ros-users mailing list
ros-users at code.ros.org<mailto:ros-users at code.ros.org>
https://code.ros.org/mailman/listinfo/ros-users
--
Kent Williams
k3nt00 at gmail.com<mailto:k3nt00 at gmail.com>
(818)203-4394
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://code.ros.org/pipermail/ros-users/attachments/20120113/a904d1fb/attachment.html>
More information about the ros-users
mailing list