[ros-users] [Discourse.ros.org] [ROS-Industrial] Using the Motoman SDA20D Dual-arms DX100 ROS Interface(Indigo)

[Ted Miller]

Hello Sinai,
Can you please try three things:

1. Make sure there is only one instance of MotoROS installed on your controller.  Boot into Maintenance mode. Touch [MotoPlus Apl] > [File List]. Make sure there is only one .out file loaded.

1. Please take a picture of the VGA monitor connected to the robot. I would like to see the startup initialization messages.

1. Please run a wireshark capture on the ROS PC. This will record the network communication between the robot and PC. https://jlospinoso.github.io/software/wireshark/networks/ubuntu/2015/02/11/configuring-wireshark-on-ubuntu-14.html





---
[Visit Topic](https://discourse.ros.org/t/using-the-motoman-sda20d-dual-arms-dx100-ros-interface-indigo/4667/29) or reply to this email to respond.