Hi Eitan -
I'm inclined to say that this isn't a network issue since lots of other
things work, like streaming video from the robot using image_transport
(and iwconfig shows really good link quality), but I'll try your
suggestions next time I'm in the lab.
Thanks,
-Dan
On 4/16/10 4:12 PM, Eitan Marder-Eppstein wrote:
> Dan,
>
> Those are strange problems to have. A hunch I have is that nav_view
> has dropped its TCP connection to the robot for one reason or another
> on certain topics. This happens to us sometimes when we're switching
> between being connected to our robots over ethernet to wireless or
> when we lose connectivity to the robot for long periods of time. I'd
> be curious about a few things:
>
> 1) Can you get things to start displaying in nav_view by running the
> following command:
> rosrun topic_tools relay [missing_topic_name] [missing_topic_name]
> This will re-advertise the topic and cause nav_view to refresh its
> TCP connections.
>
> 2) Are you sure that the robot can connect to the machine that's
> running nav_view? Have you been running rostopic echo on the robot
> itself? Or on the local machine?
>
> 3) If you use rviz, do you see the same kind of problems. If this is a
> network issue, I'd expect you to see the same problems, but it'd be
> useful to know.
>
> Hopefully this helps or we at least find out more about what's going on.
>
> Hope all is well,
>
> Eitan
>
> On Fri, Apr 16, 2010 at 1:54 PM, Dan Lazewatsky
> <lazewatskyd@cse.wustl.edu <mailto:lazewatskyd@cse.wustl.edu>> wrote:
>
> Hi all -
> We've been trying to get the nav stack running on one of our
> robots and
> are having some frustrating and not totally reproducible problems. Nav
> is setup from config files that I got working on an erratic and have
> modified for this robot. When I start up nav_view after getting amcl,
> move_base and the like going, most of the time I don't see any laser
> scan, inflated obstacles etc. in nav_view and using Set Pose
> doesn't do
> anything. move_base/local_costmap/obstacles is publishing data, and
> rxgraph shows it connected to nav_view. When I use Set Pose, I can see
> the message getting sent off, but the new pose is not reflected in
> nav_view. Sometimes, I'll see the inflated obstacles in nav_view, but
> once the map shows up they disappear.
>
> Any help would be much appreciated,
> -Dan
> _______________________________________________
> ros-users mailing list
> ros-users@code.ros.org <mailto:ros-users@code.ros.org>
> https://code.ros.org/mailman/listinfo/ros-users
>
>
>
> _______________________________________________
> ros-users mailing list
> ros-users@code.ros.org
> https://code.ros.org/mailman/listinfo/ros-users
>
(text/plain)