Re: [ros-users] values are zero in joint.h

Hi Andreas,

Could you double check that no error messages are showing up in
rosout/rosconsole? It's possible that the transmission didn't come up
correctly.

Let's also check if the actuator is changing. Echo the
mechanism_statistics topic, and check the values for the actuator that
you're connecting too (joint_p-a1_motor).

Could you also re-post the configuration for your transmission with
the corrected joint/actuator values?

-Stu

On Mon, May 10, 2010 at 11:01 AM, Andreas Vogt <andreas.vogt@dfki.de> wrote:
> hi,
> no it isn't I just forgot to edit the mail example.
>
>
>
> Am 10.05.2010 um 19:52 schrieb Wim Meeussen <meeussen@willowgarage.com>:
>
>>> <transmission name="joint_p-a1_trans" type="SimpleTransmission">
>>>                <actuator name="joint_p-a1_motor" />
>>>                <joint name="joint_p-a1" />
>>>                <mechanicalReduction>1</mechanicalReduction>
>>>                <motorTorqueConstant>1</motorTorqueConstant>
>>>    </transmission>
>>>
>>> in the yaml:
>>>
>>>  my_controller_ns:
>>>    type: MyControllerPlugin
>>>    wheel1: joint_c-w1
>>
>> The joint name in the transmission is different from the joint name in
>> the yaml. Could that be your problem?
>>
>> Wim
>>
>>
>> --
>> --
>> Wim Meeussen
>> Willow Garage Inc.
>> <http://www.willowgarage.com)
>> _______________________________________________
>> ros-users mailing list
>> ros-users@code.ros.org
>> https://code.ros.org/mailman/listinfo/ros-users
> _______________________________________________
> ros-users mailing list
> ros-users@code.ros.org
> https://code.ros.org/mailman/listinfo/ros-users
>



--
Stuart Glaser
sglaser -at- willowgarage -dot- com
www.willowgarage.com