Hi Amy,
I looked briefly on the ati website for supported hardware on linux
platforms <http://wiki.cchtml.com/index.php/Hardware>, but X1950 doesn't
appear to be listed. You can also try disabling shadows by updating
shadowTechnique in gazebo_worlds/world/empty.world to "none", i.e.
<shadowTechnique>none</shadowTechnique>
and see if that helps.
John
On Sun, May 16, 2010 at 3:37 PM, Amy Ng <
amyntt@gmail.com> wrote:
> Hi
>
> i m using Radeon X1950 (open source ATI driver, the one come with Ubuntu
> 32bit Lucid) , on the list it said X1600 was fine, so I thought my card
> might be able to run it, and i can run Ogre with no major issues....
>
> :( if it is the graphic card.....
>
> hmmm.......i'll see what I can do about it.....
>
> Thanks so much for your replies
>
>
>
>
> On Sun, May 16, 2010 at 2:34 PM, John Hsu <johnhsu@willowgarage.com>wrote:
>
>> Hi Amy,
>> what kind of graphics card/driver are you using? Some of the older radeon
>> cards are not supported, please take a look here<http://ros.org/wiki/simulator_gazebo/SystemRequirements>for some references.
>> John
>>
>>
>> On Fri, May 14, 2010 at 7:10 PM, Amy Ng <amyntt@gmail.com> wrote:
>>
>>> Hi
>>>
>>> it just hangs indefinitely....
>>>
>>> what i did was:
>>>
>>> run the gazebo in my console with
>>>
>>> roslaunch gazebo_worlds empty_world.launch
>>>
>>>
>>> and the console displays some messages (can't read as they disappaer too quickly):
>>>
>>> and then lots of the same line:
>>>
>>> Allocating 16 x 16 radeon RBO (pitch 16)
>>> Allocating 16 x 16 radeon RBO (pitch 16)
>>> Allocating 16 x 16 radeon RBO (pitch 16)
>>> Allocating 16 x 16 radeon RBO (pitch 16)
>>> Allocating 16 x 16 radeon RBO (pitch 16)
>>>
>>>
>>>
>>>
>>>
>>> Allocating 16 x 16 radeon RBO (pitch 16)
>>>
>>>
>>> ODE Message 2: inertia must be positive definite in dMassCheck() File mass.cpp Line 53
>>>
>>>
>>> and the gazebo gui starts with and empty world,
>>>
>>>
>>> in the console, i then type:
>>>
>>>
>>> roslaunch gazebo_worlds table.launch
>>>
>>>
>>> the prompt just jump to next line with nothing happen, (nothing in the console or in the GUI)
>>>
>>>
>>> when i quit gazebo, this comes up:
>>>
>>> [gazebo-2] process has died [pid 4810, exit code -11].
>>>
>>>
>>>
>>>
>>>
>>> and tell me it has been logged
>>>
>>> but the console also just hangs there
>>>
>>> i need to quit using Ctrl+c
>>>
>>>
>>> and my log is just:
>>> directory [/tmp/gazebo-tingting-0] already exists (previous crash?)
>>> but the owner gazebo server (pid=4710) is not running.
>>>
>>>
>>>
>>>
>>>
>>> deleting the old information of the directory [/tmp/gazebo-tingting-0]
>>> Gazebo successfully initialized
>>>
>>>
>>> Am i missing anything?
>>>
>>> thanks
>>>
>>> amy
>>>
>>>
>>>
>>> On Fri, May 14, 2010 at 6:06 AM, John Hsu <johnhsu@willowgarage.com>wrote:
>>>
>>>>
>>>>
>>>> On Thu, May 13, 2010 at 11:02 AM, Amy Ng <amyntt@gmail.com> wrote:
>>>>
>>>>> Hi thanks guys
>>>>>
>>>>> it works! :D but i have a few questions
>>>>>
>>>>> when i tried to run the .patch as patch < pr2_controllers.patch at
>>>>> ros/stacks/pr2_controllers/
>>>>> it said the patch output only garbage
>>>>> at then end i need to manually edit every file
>>>>>
>>>>> was i doing anything wrong?
>>>>>
>>>>
>>>> (roscd pr2_controllers; patch -p0 -N < pr2_controllers.patch;)
>>>>
>>>>
>>>>>
>>>>> and
>>>>>
>>>>> I got the empty world launched
>>>>>
>>>>> and in the tutorial it said then add a table by typing
>>>>>
>>>>> roslaunch gazebo_worlds table.launch
>>>>>
>>>>> just wondering where do i type this in?
>>>>>
>>>>>
>>>> any console with ROS environment variables setup should work.
>>>>
>>>> i tried in the console but nothing happened...
>>>>>
>>>>>
>>>> Does the command just hang indefinitely?
>>>>
>>>> typical response to the script looks like this:
>>>>
>>>>
>>>>
>>>> > roslaunch gazebo_worlds table.launch
>>>> ... logging to
>>>> /u/johnhsu/.ros/log/8e374d24-5eca-11df-b923-00301b81c2e5/roslaunch-akb-5966.log
>>>>
>>>> started roslaunch server http://akb:48466/
>>>>
>>>> SUMMARY
>>>> ========
>>>>
>>>> PARAMETERS
>>>> * /table_description
>>>>
>>>> NODES
>>>> /
>>>> spawn_table (gazebo_tools/gazebo_model)
>>>>
>>>> ROS_MASTER_URI=http://akb:11311/
>>>>
>>>> core service [/rosout] found
>>>> process[spawn_table-1]: started with pid [5985]
>>>> [ INFO] [33.788000000]: gazebo_model: waiting for gazebo factory,
>>>> usually launched by 'roslaunch `rospack find
>>>> gazebo_worlds`/launch/empty_world.launch'
>>>> [spawn_table-1] process has finished cleanly.
>>>> log file:
>>>> /u/johnhsu/.ros/log/8e374d24-5eca-11df-b923-00301b81c2e5/spawn_table-1*.log
>>>> all processes on machine have died, roslaunch will exit
>>>> shutting down processing monitor...
>>>> ... shutting down processing monitor complete
>>>> done
>>>>
>>>>
>>>>
>>>>
>>>>> any advice for a newbie like me?
>>>>>
>>>>>
>>>>> thanks soooo much, I have spent 2 weeks trying to get gazebo to work and this is the first time i see it running!
>>>>>
>>>>> thanks again :D
>>>>>
>>>>>
>>>>>
>>>>> amy
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> On Fri, May 14, 2010 at 3:26 AM, Joachim Bean <joachimbean@gmail.com>wrote:
>>>>>
>>>>>> Once you apply the patches, ROS works mostly fine on 10.04
>>>>>>
>>>>>> -- Joachim
>>>>>>
>>>>>> On May 13, 2010, at 12:52 PM, John Hsu wrote:
>>>>>>
>>>>>> looks like you're on lucid. You'll need to apply patches here<https://code.ros.org/trac/wg-ros-pkg/ticket/4271>or switch to svn trunk/1.0 branch for stacks pr2_controllers and
>>>>>> pr2_mechanism, or wait for the next release of these stacks.
>>>>>> John
>>>>>>
>>>>>> On Thu, May 13, 2010 at 9:40 AM, Amy Ng <amyntt@gmail.com> wrote:
>>>>>>
>>>>>>> hi
>>>>>>>
>>>>>>> it has an error at rosmake 80 of 91
>>>>>>>
>>>>>>> [100%] Building CXX object
>>>>>>> CMakeFiles/pr2_gripper_action.dir/src/pr2_gripper_action.o
>>>>>>> Linking CXX executable ../bin/pr2_gripper_action
>>>>>>>
>>>>>>> /home/tingting/ros/stacks/pr2_controllers/robot_mechanism_controllers/lib/librobot_mechanism_controllers.so:
>>>>>>> undefined reference to
>>>>>>> `boost::condition_variable::wait(boost::unique_lock<boost::mutex>&)'
>>>>>>>
>>>>>>> /home/tingting/ros/stacks/pr2_controllers/robot_mechanism_controllers/lib/librobot_mechanism_controllers.so:
>>>>>>> undefined reference to `boost::condition_variable::notify_one()'
>>>>>>> collect2: ld returned 1 exit status
>>>>>>> make[3]: *** [../bin/pr2_gripper_action] Error 1
>>>>>>> make[3]: Leaving directory
>>>>>>> `/home/tingting/ros/stacks/pr2_controllers/pr2_gripper_action/build'
>>>>>>> make[2]: *** [CMakeFiles/pr2_gripper_action.dir/all] Error 2
>>>>>>> make[2]: Leaving directory
>>>>>>> `/home/tingting/ros/stacks/pr2_controllers/pr2_gripper_action/build'
>>>>>>> make[1]: *** [all] Error 2
>>>>>>> make[1]: Leaving directory
>>>>>>> `/home/tingting/ros/stacks/pr2_controllers/pr2_gripper_action/build'
>>>>>>>
>>>>>>> am i missing a particular boost library?
>>>>>>>
>>>>>>> Thanks
>>>>>>>
>>>>>>>
>>>>>>> On Thu, May 13, 2010 at 10:27 AM, John Hsu <johnhsu@willowgarage.com
>>>>>>> > wrote:
>>>>>>>
>>>>>>>> Can you post the outputs of
>>>>>>>>
>>>>>>>> rosmake pr2_gazebo
>>>>>>>>
>>>>>>>> thanks,
>>>>>>>> John
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> On Wed, May 12, 2010 at 5:25 PM, Amy Ng <amyntt@gmail.com> wrote:
>>>>>>>>
>>>>>>>>> Hi John,
>>>>>>>>>
>>>>>>>>> can I re install gazebo_plugins individually or do i have to re
>>>>>>>>> compile the whole thing?
>>>>>>>>>
>>>>>>>>> and i launch the world via the below command
>>>>>>>>>
>>>>>>>>> roslaunch gazebo_worlds empty_world.launch
>>>>>>>>>
>>>>>>>>> Thanks
>>>>>>>>>
>>>>>>>>> Amy
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Thu, May 13, 2010 at 9:51 AM, John Hsu <
>>>>>>>>> johnhsu@willowgarage.com> wrote:
>>>>>>>>>
>>>>>>>>>> Hi Amy,
>>>>>>>>>> libgazebo_ros_time.so is in gazebo_plugins. So most likely
>>>>>>>>>> gazebo_plugins did not compile correctly. Also, can you point me to the
>>>>>>>>>> exact commands you used to bring up the world?
>>>>>>>>>> thanks,
>>>>>>>>>> John
>>>>>>>>>>
>>>>>>>>>> On Wed, May 12, 2010 at 3:31 PM, Amy Ng <amyntt@gmail.com> wrote:
>>>>>>>>>>
>>>>>>>>>>> Hi everybody
>>>>>>>>>>>
>>>>>>>>>>> I am new here.
>>>>>>>>>>>
>>>>>>>>>>> I have just installed gazebo-tools and pr2-gazebo as per
>>>>>>>>>>> instructions on web site and when i tried to run empty world I got this
>>>>>>>>>>> error:
>>>>>>>>>>>
>>>>>>>>>>> ODE Message 2: inertia must be positive definite in dMassCheck()
>>>>>>>>>>> File mass.cpp Line 53
>>>>>>>>>>> Error Loading Gazebo
>>>>>>>>>>> /home/tingting/ros/stacks/simulator_gazebo/gazebo/gazebo-svn/server/Simulator.cc:240
>>>>>>>>>>> : Exception: Failed to load the World
>>>>>>>>>>> /home/tingting/ros/stacks/simulator_gazebo/gazebo/gazebo-svn/server/controllers/ControllerFactory.cc:116
>>>>>>>>>>> : Exception: Failed to load libgazebo_ros_time.so: file not found
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> I have no idea where can i find libgazebo_ros_time.so and where
>>>>>>>>>>> should i put it
>>>>>>>>>>>
>>>>>>>>>>> any help will be great.
>>>>>>>>>>>
>>>>>>>>>>> thanks
>>>>>>>>>>>
>>>>>>>>>>> Amy
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> _______________________________________________
>>>>>>>>>>> ros-users mailing list
>>>>>>>>>>> ros-users@code.ros.org
>>>>>>>>>>> https://code.ros.org/mailman/listinfo/ros-users
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> _______________________________________________
>>>>>>>>>> ros-users mailing list
>>>>>>>>>> ros-users@code.ros.org
>>>>>>>>>> https://code.ros.org/mailman/listinfo/ros-users
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> ros-users mailing list
>>>>>>>>> ros-users@code.ros.org
>>>>>>>>> https://code.ros.org/mailman/listinfo/ros-users
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> ros-users mailing list
>>>>>>>> ros-users@code.ros.org
>>>>>>>> https://code.ros.org/mailman/listinfo/ros-users
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> ros-users mailing list
>>>>>>> ros-users@code.ros.org
>>>>>>> https://code.ros.org/mailman/listinfo/ros-users
>>>>>>>
>>>>>>>
>>>>>> _______________________________________________
>>>>>> ros-users mailing list
>>>>>> ros-users@code.ros.org
>>>>>> https://code.ros.org/mailman/listinfo/ros-users
>>>>>>
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> ros-users mailing list
>>>>>> ros-users@code.ros.org
>>>>>> https://code.ros.org/mailman/listinfo/ros-users
>>>>>>
>>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> ros-users mailing list
>>>>> ros-users@code.ros.org
>>>>> https://code.ros.org/mailman/listinfo/ros-users
>>>>>
>>>>>
>>>>
>>>> _______________________________________________
>>>> ros-users mailing list
>>>> ros-users@code.ros.org
>>>> https://code.ros.org/mailman/listinfo/ros-users
>>>>
>>>>
>>>
>>> _______________________________________________
>>> ros-users mailing list
>>> ros-users@code.ros.org
>>> https://code.ros.org/mailman/listinfo/ros-users
>>>
>>>
>>
>> _______________________________________________
>> ros-users mailing list
>> ros-users@code.ros.org
>> https://code.ros.org/mailman/listinfo/ros-users
>>
>>
>
> _______________________________________________
> ros-users mailing list
> ros-users@code.ros.org
> https://code.ros.org/mailman/listinfo/ros-users
>
>
(text/plain)