Hi Jack,
In the bumblebee2 package, the left and right image which are actually
mono8 image is published even if I used the
DC1394_VIDEO_MODE_640x480_MONO16 to grab the image from bumblebee.
After grabbing 16bit image, I separate the one 16bit image into two
8bit images and publish them.
Best,
Soonhac
Quoting Jack O'Quin <
jack.oquin@gmail.com>:
> On Thu, Jun 10, 2010 at 11:22 AM, Renato Samperio
> <mintaka_alnitak@hotmail.com> wrote:
>> Dear Soonhac Hong,
>>
>> I am unable to see images from the bumblebee2 package. Our camera is a
>> bumblebee2 BB2-08S2C 3.8 mm. For running the node, I use the commands:
>>
>> $ roslaunch bumblebee2 Bumblebee2.launch
>> $ rosrun image_view image_view image:=/bumblebee2/left/image_raw
>> $ rosrun image_view image_view image:=/bumblebee2/right/image_raw
>>
>> After executed, I get a couple of windows to the "image_raw" service with a
>> gray screen and without any image. By using Coriander I could see that the
>> mode DC1394_VIDEO_MODE_640x480_MONO16 that you added is not active.
>
> I had implemented this mode in a more recent version of the camera1394
> driver, only to discover that the ROS image pipeline currently does
> not handle mono16 data properly. Maybe that will start working in
> D-turtle, but not right now (in latest).
>
> I recommend using one of the mono8 modes, instead.
> --
> joq
> _______________________________________________
> ros-users mailing list
> ros-users@code.ros.org
> https://code.ros.org/mailman/listinfo/ros-users
>
>
(text/plain)