Hi, Tully.
Of the three systems on which this has occurred, two are apt-based
installs of boxturtle and one comes from the svn source. Ubuntu Karmic
in all cases.
Thanks for your help.
Chris
Chris,
How did you install boxturtle(debs vs source vs rosinstall)? And can
you confirm that all the versions are the same?
Tully
On Mon, Jul 19, 2010 at 1:59 PM, Christopher Crick
<
chriscrick@cs.brown.edu <
mailto:chriscrick@cs.brown.edu>> wrote:
Hello.
I have a very esoteric and difficult-to-debug problem with the tf
stack. To isolate what's going on, I put together the simplest possible
package that generates the error. Here's the executable for a
tf_error_test package, which depends on roscpp, rospy and tf. On _some_
machines in our lab, the following code causes an error:
import roslib; roslib.load_manifest('tf_error_test')
import rospy
import tf
rospy.init_node('tf_error_test')
listener = tf.TransformListener()
while True:
pass
'rosrun tf_error_test tf_error_test.py' will yield
'/opt/ros/boxturtle/ros/bin/rosrun: line 35: 10288 Illegal
instruction $exepath "$@"'
This happens on several machines, but not all of them. On one system,
the problem went away when Ubuntu and ROS were both entirely
reinstalled, but for obvious reasons I'd prefer knowing what's going
wrong to blindly nuking computers. Does anybody have any suggestions,
or has anyone encountered this problem before? I'm using a stock
boxturtle install of ROS on an Ubuntu 9.10 operating system.
Thanks.
Chris
_______________________________________________
ros-users mailing list
ros-users@code.ros.org <mailto:ros-users@code.ros.org>
https://code.ros.org/mailman/listinfo/ros-users
--
Tully Foote
Systems Engineer
Willow Garage, Inc.
tfoote@willowgarage.com <
mailto:tfoote@willowgarage.com>
(650) 475-2827
(text/plain)