Christian,
Take a look at this thread:
http://ros-users.122217.n3.nabble.com/Costmap2D-Inflation-Radius-Maximum-td842808.html
Basically, RVIZ only draws up to the inscribed radius of the robot, which is
independent of the inflation radius.
- Eric
On Mon, Sep 6, 2010 at 12:45 PM, Christian Verbeek <
verbeek@servicerobotics.eu> wrote:
> I found that if I use an inflation_radius > 0.55 (the default in in
> costmap_2d) the inflated obstacles are displayed in rviz as if I used 0.55.
>
> I set the inflation_radius to 1 and see no difference in rviz compared
> to 0.55. The robots behaviour seems to honour the 1.
>
> _______________________________________________
> ros-users mailing list
> ros-users@code.ros.org
> https://code.ros.org/mailman/listinfo/ros-users
>
(text/plain)