Re: [ros-users] Running RVIZ

Does anybody have an idea about this? I guess, it is a need to write a node to publish the topic. Or anybody have had one written it.

Thanks.

-Shahmi-

--- On Wed, 10/20/10, shahmi <alfarobi0161@yahoo.com> wrote:

From: shahmi <alfarobi0161@yahoo.com>
Subject: Re: [ros-users] Running RVIZ
To: "User discussions" <ros-users@code.ros.org>
Date: Wednesday, October 20, 2010, 5:51 PM

Hi,

Thanks a lot Ugo and Ivan.

I actually would like to run  "srl_people_tracker_0.2" and visualize the data obtained from a log file provided in the package.

I've tried to run the following command and could not find any topic to subscribe to:

rosrun srl_people_tracker_0.2 mht_run  -c parameters/settings/parameters.ini -f /opt/ros/cturtle/stacks/srl_people_tracker_0.2/srl-people-tracker-0.2/testfile/testing1.log

My aim is to visualize it via RVIZ not via GNUPLOT as the package provided.

The package itself is at:
http://www.ros.org/browse/details.php?name=srl_people_tracker_0.2


Thanks in advance.

Regards,
Shahmi

--- On Wed, 10/20/10, Ivan Dryanovski <ivan.dryanovski@gmail.com> wrote:

From: Ivan Dryanovski <ivan.dryanovski@gmail.com>
Subject: Re: [ros-users] Running RVIZ
To: "User discussions" <ros-users@code.ros.org>
Date: Wednesday, October 20, 2010, 3:36 PM

Shahmi,

You probably won't need to write any nodes. To visualize your data, you will need a node to communicate with the laser driver and publish the scans, and then rviz to visualize them. If your laser is a Hokuyo or a SICK, there is support for them in the laser_drivers stack:

http://www.ros.org/wiki/laser_drivers
Ivan
On Wed, Oct 20, 2010 at 7:48 AM, Ugo Cupcic <ugo@shadowrobot.com> wrote:

    Do you have a node publishing the cloud point?

    To run rviz, you just need to run:

    > rosrun rviz rviz

    You should have a look at: http://www.ros.org/wiki/rviz/UserGuide

    Cheers,

    Ugo

    On 20/10/10 12:45, shahmi wrote:

            Hi all,

              I would like know, do we need to write a node in order to
              run RVIZ package. I actually want to visualize data  from
              laser scanner via RVIZ. Is it possible to run it even
              without any node written.

              Thanks in advance.

              Regards,

              Shahmi

      _______________________________________________
ros-users mailing list
ros-users@code.ros.org
https://code.ros.org/mailman/listinfo/ros-users

    -- 
Ugo Cupcic         |  Shadow Robot Company | ugo@shadowrobot.com
Software Engineer  |    251 Liverpool Road |
need a Hand?       |    London  N1 1LX     | +44 20 7700 2487
http://www.shadowrobot.com/hand/              @shadowrobot  

_______________________________________________

ros-users mailing list

ros-users@code.ros.org

https://code.ros.org/mailman/listinfo/ros-users





-----Inline Attachment Follows-----

_______________________________________________
ros-users mailing list
ros-users@code.ros.org
https://code.ros.org/mailman/listinfo/ros-users




-----Inline Attachment Follows-----

_______________________________________________
ros-users mailing list
ros-users@code.ros.org
https://code.ros.org/mailman/listinfo/ros-users