Re: [ros-users] Best way to view RViz remotely?

Hi,

You might want to look at the following page:
http://www.ros.org/wiki/ROS/Technical%20Overview

ROS is designed to be running on multiple platforms. Just set the
ROS_MASTER_URI variable to point to your robot, and rviz will be able to
access all the topics.

Best,

On 11/06/10 16:12, Patrick Goebel wrote:
> Hello,
>
> I am running ROS (latest cturtle) on my robot using an onboard 1.6 Ghz
> dual-core Zotac ION-ITX with 4Gb RAM. This setup is fairly snappy when
> I view RViz through a monitor directly attached to the robot
> motherboard. However, I'd like to run the Zotac/robot headless and view
> RViz on my desktop. The robot connects to my local LAN via 802.11g and
> my desktop is hardwired at 100 Mb/s. These are the only two machines on
> the network and I am running the basic navigation stack with a Hokuyo
> laser scanner.
>
> The best result I've gotten so far is using a VNC connection from my
> desktop to the robot. However, updates in RViz are quite sluggish (2-3
> seconds delay). The second best is to use "ssh -X" from the desktop to
> the robot and display RViz back to the desktop. This is really, really
> sluggish (3-5 seconds delay).
>
> Is there a better way to view the robot data in RViz?
>
> Thanks!
> Patrick Goebel
> Behavioral Sciences
> Stanford University
> _______________________________________________
> ros-users mailing list
> ros-users@code.ros.org
> https://code.ros.org/mailman/listinfo/ros-users
>

--
Dr. Cedric Pradalier
http://www.asl.ethz.ch/people/cedricp