I think you would rather get a panda board. It is cheaper and way more
powerful.
http://pandaboard.org/content/platform
On Tue, Dec 7, 2010 at 2:58 PM, Chris Brown <
chrisneilbrown@gmail.com>wrote:
>
>
> On Wed, Dec 8, 2010 at 7:24 AM, peter heim <peterheim@bigpond.com> wrote:
>
>> On 07/12/10 22:16, Chris Brown wrote:
>>
>> Where can I get an arbotix based module, sensors, framework, servos,
>> wireless comms etc locally?
>> NOTE I do not have Microsoft products at home, If the product is windows
>> based its pretty useless to me
>>
>> On Tue, Dec 7, 2010 at 6:40 PM, peter heim <peterheim@bigpond.com> wrote:
>>
>>> On 07/12/10 12:20, Chris Brown wrote:
>>>
>>> Hello,
>>>
>>> I'd like to start playing with some robot hardware integrating ROS
>>> I have some electronic and programming skills
>>> Are their any simple cheap development kits out there
>>> Please note that I do live in Australia and certain products may not be
>>> available or costly to import
>>>
>>> --
>>> Chris
>>>
>>>
>>>
>>> _______________________________________________
>>> ros-users mailing list
>>> ros-users@code.ros.orghttps://code.ros.org/mailman/listinfo/ros-users
>>>
>>> Hi Chris
>>> I live in Australia (cairns) the Arbotix and the serializer MCU are a
>>> good start the serializer (from robotics connection)
>>> costs about $10 in postage, there is a good fourm at
>>>
>>> http://forums.trossenrobotics.com
>>>
>>>
>>> Both have help available
>>>
>>> regards Peter
>>>
>>>
>>> _______________________________________________
>>> ros-users mailing list
>>> ros-users@code.ros.org
>>> https://code.ros.org/mailman/listinfo/ros-users
>>>
>>>
>>
>>
>> --
>> Chris
>> Aluminium Replacement Parts <http://arp.chrisb.id.au/>
>> @arpartsau <http://twitter.com/arpartsau>
>>
>>
>>
>> _______________________________________________
>> ros-users mailing listros-users@code.ros.orghttps://code.ros.org/mailman/listinfo/ros-users
>>
>> Hi
>> the arbotix can be bought here
>>
>> http://www.trossenrobotics.com/c/arbotix-robocontrollers.aspx
>>
>> check out this thread
>>
>> http://forums.trossenrobotics.com/showthread.php?t=4410
>>
>> i run this under ubuntu 10.4 and ROS
>> the arbotix with dynamixel servo sharp IR range finder for about $160 + a
>> drive base and encoders
>> will allow you to use the navigation stack (but not gmapping)
>>
>> peter
>>
>>
>>
>>
>> _______________________________________________
>> ros-users mailing list
>> ros-users@code.ros.org
>> https://code.ros.org/mailman/listinfo/ros-users
>>
>>
> Thanks
> I know this isnt a hardware mailing list
> But on that site I found the roboard, basically a 1Ghz 486 based SoC with
> plenty of I/O. I can run ROS on this controller and wifi to my server if
> need be
> Would the roboard make good starting point?
> As for the rest of the hardware I should be able to source it all locally
> Luckily I can make my own aluminium parts
>
> --
> Chris
>
>
>
>
> _______________________________________________
> ros-users mailing list
> ros-users@code.ros.org
> https://code.ros.org/mailman/listinfo/ros-users
>
>
(text/plain)