Hi Matt,
Without a lot more information we can't help you much. Please see
http://www.ros.org/wiki/Support#Guidelines_for_mailing_list_messages
I would suggest that you put in some debugging statements to make sure
that the obstacles is being detected. If you can track down more
specifically where you think there is a problem and provide a way for us
to reproduce the problem that would allow us to help you.
Tully
On 12/07/2010 09:20 PM, Matt Bergsma wrote:
>
> Hello;
>
> Currently working on a Sonar Based 'failsafe' object avoidance code,
> which was originally developed and tested in Aria, and since porting
> it from Aria to ros -- p2os I have found its gone from behaving as
> expected to being very inconsistent at best, even after increasing its
> internal parameters so both stop and stop/disable zones are
> significantly larger. I would expect part of this would be lag in the
> subnet the robot and my laptop are connected into, but even moving the
> code onto the powerbot these same issues are occurring. Eg. The robot
> is hitting our test object.
>
> Note -- The first set of tests had only the p2os node on the powerbot,
> and roscore, my failsafe code, and a modified version of the
> teleop_keyboard base code from the p2os package running on an hp
> tm2-2050 laptop, and when the code was moved to the powerbot
> everything except for the teleop code was moved to run on the powerbot
> but not utilizing the local loopback.
>
> When this code was developed and tested in aria, it behaved as
> expected, and its very light weight (running a simple profile in aria
> was giving run times of around 28s for 1,000,000 sets of readings and
> decision on all the sonar sensors) which ran on the powerbot itself,
> and the code hasn't been significantly modified, except to talk using
> the ROS framework to the applicable channels. So I would expect it
> isn't the issue.
>
> Hopefully someone can shed some light on the issues encountered.
>
> Thanks, Matt Bergsma
>
>
> _______________________________________________
> ros-users mailing list
> ros-users@code.ros.org
> https://code.ros.org/mailman/listinfo/ros-users
>
(text/plain)