Hi Ben,
Thanks for your message! I actually saw your post and this answer before,
but I was hoping this issue would've been sorted by now.
It's a shame that ROS does not even recognise opensuse. I'm very curious to
know the reasons...
I won't have time to look into patching rosdep to include opensuse support,
but I took the short route and tried to manually install the rosdeps.
Running "rosmake --no-rosdep rostest", the output said 0 fail (or something
along those lines -- I don't remember now).
The fact is that I don't know how to proceed with the installation.
Documentation is very poor in that respect.
If anyone could help me out pointing me to the right direction, I would be
grateful!
Cheers,
Murilo
On 21 December 2010 17:02, Benjamin Cohen <
bencohen2@gmail.com> wrote:
> Hey Murilo,
>
> A while back I asked about the ROS support on OpenSuse 11.2 and I was told
> that while there is no current support right now, it isn't that difficult to
> add official support myself. My need to get it working immediately on
> OpenSuse might have gone away (I was interested in installing ros on the
> machines a linux lab at my school for a class next semester) so I won't be
> getting around to it anytime soon. I copied and pasted Tully's directions
> from his response to me on Oct 27. If you decide to go through with adding
> suse support, it would be great if you can keep the list updated on your
> progress :).
>
> Hi Ben,
> It should be possible. I don't know how recently people have tried those
> instructions. The biggest challenge you will face is that I see that SuSE
> is not detected by rosdep, and I don't think that there are any definitions
> of rosdeps for SuSE either.
>
> This gives you two options. One is to manually install all the rosdeps
> manually. The other option is to patch rosdep to support SuSE. There are
> two parts to this. One is adding the OS detector,
> http://www.ros.org/wiki/rosdep/Tutorials/Add%20Support%20for%20an%20OS%20to%20rosdep
> and the other is to add SuSE defintions for all the things in rosdep.yaml
> files,
> http://www.ros.org/wiki/rosdep/Tutorials/Add%20new%20OS%20to%20rosdep.yaml
>
> I would recommend option 2. It is a little bit more work, but that likely
> will save you work in the long run since you don't have to disable rosdep
> checking. Also the incremental difference in effort is small and a lot of
> SuSE users would be appreciative.
>
> The graphics cards may be a problem for visualization, but often you won't
> know until you try. Some collected statistics
> http://www.ros.org/wiki/simulator_gazebo/SystemRequirements
>
>
> Let me know if I can help at all. It would be great to be able to improve
> support for SuSE.
> Tully
>
>
> -- ben
>
>
>
> On Tue, Dec 21, 2010 at 11:16 AM, Murilo Fernandes Martins <
> muhrix@gmail.com> wrote:
>
>> Hi there,
>>
>> I was just wondering if anyone has managed to install ROS on opensuse
>> 11.3.
>>
>> Cheers,
>>
>> Murilo
>>
>>
>>
>> _______________________________________________
>> ros-users mailing list
>> ros-users@code.ros.org
>> https://code.ros.org/mailman/listinfo/ros-users
>>
>>
>
> _______________________________________________
> ros-users mailing list
> ros-users@code.ros.org
> https://code.ros.org/mailman/listinfo/ros-users
>
>
(text/plain)