Hi
Configuring eclipse can be a bit tricky. This tutorial was the most
straight forward explanation:
http://www.arduino.cc/playground/Code/Eclipse
If you are still having trouble, let me know and I will write up an
explanation on the ROS site.
-Adam
On Sun, Jan 9, 2011 at 2:36 PM, airthimble
<
joseph.st.amand@mines.sdsmt.edu>wrote:
>
> I have been trying to use this package in order to communicate with a
> Seeduino. I tried following the avr-bridge tutorial but had trouble with
> it.
> I typically put together a make file for a project and just use a text
> editor. I have no trouble using eclipse, I just cannot figure out how to
> configure it. There does not seem to be a well-made tutorial for
> configuring
> eclipse in Ubuntu 11.04.
>
> If anyone would be able to give me a push in the right direction it would
> be
> much appreciated!
>
> Thanks!
> --
> View this message in context:
> http://ros-users.122217.n3.nabble.com/AVR-and-ROS-tp2200563p2222791.html
> Sent from the ROS-Users mailing list archive at Nabble.com.
> _______________________________________________
> ros-users mailing list
> ros-users@code.ros.org
> https://code.ros.org/mailman/listinfo/ros-users
>
(text/plain)