Re: [ros-users] Introduction To ROS

Top Page
Attachments:
Message as email
+ (text/plain)
Delete this message
Reply to this message
Author: User discussions
Date:  
To: User discussions
Subject: Re: [ros-users] Introduction To ROS
Hi Jason,

Yes, ROS is mostly command line based via the terminal application.
This will become more familiar as you work through the tutorials. It
sounds like the ROS bin directory is not in your PATH environment
variable. Assuming you have installed C-turtle on Ubuntu Linux, when
you execute the command:

printenv PATH

you should see

/opt/ros/cturtle/ros/bin

as part of the output. Also, when you say you went though the
environmental setup portion, double check that you have run the
following commands:

echo "source /opt/ros/cturtle/setup.bash" >> ~/.bashrc
. ~/.bashrc

Note the . at the beginning of that second command. Then make sure you
run the second command in any open terminal windows (or simply close
them then bring them back up again).

The .bashrc file gets run whenever you bring up a new terminal window
and it sets various environment variables such as PATH. The ROS
environment setup commands listed above cause the ROS setup.bash file to
be run as part of your .bashrc file.

If you still have trouble, consider posting the contents of your .bashrc
file here.

--patrick

On 02/13/2011 06:21 AM, wrote:
> Hello all,
>
> I think my biggest problem is that I am using Linux for the first time. Do
> I access ROS through the terminal application in Linux, or does ROS
> actually have a user interface, like an executable that I can click
> actually click on and open the program through? When I try to run the
> beginner tutorials, such as rospack, it says that there is no command
> 'rospack', although I have downloaded ROS following the given instructions
> on the website, all the way through the environmental setup portion.
> Therefore my next step was to work through the beginner tutorials, but all
> of the ros commands I use come back saying that there are no such
> commands. Should I re-download the program, or am I missing something? Any
> help would be greatly appreciated!
>
> Thank you for your time,
> Jason
>
>
> _______________________________________________
> ros-users mailing list
>
> https://code.ros.org/mailman/listinfo/ros-users